New rule…Rifle range target frames….must be….5 feet to the center of the lowest target… so 5 feet four inches ( because of the frame legs that go into the pipe ground) to the middle of the lowest target. Starting June….your target doesn’t comply…no rifle shooting! Anybody know the reason?

they want the rounds to impact the middle of the berm...

New rule…Rifle range target frames….must be….5 feet to the center of the lowest target… so 5 feet four inches ( because of the frame legs that go into the pipe ground) to the middle of the lowest target. Starting June….your target doesn’t comply…no rifle shooting! Anybody know the reason?

they want the rounds to impact the middle of the berm...

Asian man syndrome resulting from negative Western perceptions

Anybody know the reason?

Because you suck, and they hate you.  (HK gun reference)

Next up:

If you are shooting low (below the 5' center of your target), you'll be required to mount your targets higher than 5'.

Still shooting too low?  Mandatory training and qualification test administered by a state-certified rifle instructor.

Asian man syndrome resulting from negative Western perceptions

  Anybody know the reason?

As with many of the Hawaii government mandates, there really isn't any.

Going to be some interesting frame designs this Saturday.

😀

Selling on Craigslist



Sent from my moto g power (2021) using Tapatalk

http://khsc.info/wp-content/uploads/2017/01/Rifle-Frame.pdf

On the website, frame template says 48" to 80" for height

When KHSC provided frames they were about that tall. When shooters returned them some were halved.

http://khsc.info/wp-content/uploads/2017/01/Rifle-Frame.pdf

On the website, frame template says 48" to 80" for height

None of the old rules matter now.  HI politicians are pissed about Bruen, so they intend to poke and harass gun owners as much as possible to make gun ownership anything but pleasant.

Plus, that website is not the official range site.

http://khsc.info/wp-content/uploads/2017/01/Rifle-Frame.pdf

On the website, frame template says 48" to 80" for height

Updated website
https://www.honolulu.gov/index.php?option=com_content&view=article&id=38579:koko-head-shooting-complex&catid=182:site-dpr-cat

https://www.honolulu.gov/rep/site/dpr/pmrs_docs/Rifle_Range_target_frame_April_2023_Koko_Head_Shooting_Complex.pdf

Ok, so it says the 2X2 would be 60" to 80".

If someone opts to build one at 60" the center of his target will not be 60" above the ground.

Someone check my math please.

Selling on Craigslist



Sent from my moto g power (2021) using Tapatalk

This doesn't look 5 feet if you place the center of the target at the very bottom of the frame. More like 3 ft.

Ok, so it says the 2X2 would be 60" to 80".

If someone opts to build one at 60" the center of his target will not be 60" above the ground.

Someone check my math please.

Your math is correct.  The calculation is above 2nd grade math so the gubment . . .

Updated website
https://www.honolulu.gov/index.php?option=com_content&view=article&id=38579:koko-head-shooting-complex&catid=182:site-dpr-cat

https://www.honolulu.gov/rep/site/dpr/pmrs_docs/Rifle_Range_target_frame_April_2023_Koko_Head_Shooting_Complex.pdf

Mahalos for the links 

The first link only states minimum height with no maximum & the second link is for a material list (again no maximum height) . . .

i'll make mine 15 feet tall 

The max target height will depend on where the rsos want your bullets to impact on the backstop

Like the pistol range where you cannot stack targets vertically.

i'll make mine 15 feet tall 

Is there a max height posted?

Is there a max height posted?

I imagine if not, there soon will be.