Sharpshooting (Read 12425 times)

stegosaurus

Sharpshooting
« on: August 25, 2010, 06:49:08 PM »
Being a gun noob but really feeling the obsession start to grow, I got to thinking... I may want to try my hand at long distance marksmanship. I like that it takes a great deal of time and practice to master. Since I hardly play golf these days, I think I might want to start up a new hobby that will build skill. I have a few questions for you all:

1) can someone point me to some online resources where I can get the basics (technique, equipment, etc.)
2) what kinds of firearms are good for sharpshooting?
3) what are the basic components that all long distance rifles share?
4) how much am I looking to spend for a decent build?
5) are there any local clubs I can join that are dedicated to this?
6) is it okay to call them "sniper rifles"?

Thanks in advance!
"When you outlaw guns, only the outlaws have guns."

Tom_G

Re: Sharpshooting
« Reply #1 on: August 25, 2010, 10:16:54 PM »
There's a decent article on Chuck Taylor's website.  This from a man who trained snipers in-country during Vietnam.

In this day, it is not hard to get a rifle capable of MOA performance.  Most Remington 700 rifles will do it out of the box.  The challenge, of course, is for the rifleman to be able to rise to the capabilities of the gun. 

You can spend a fortune on the "perfect" long range rifle (whatever you decide that is) but you really don't need to.  A decent rifle with decent glass and a lot of practice will get you farther.  I was able to consistently hold about 1.5 MOA out to 500 yards using an m1903a4, surplus M2 ball ammo, and a fixed 10x40 Bushnell scope at the last tactical rifle class. 

There are a couple of long-range clubs that shoot on the military ranges.  I believe that one of our forum members, Heavies, shoots with them. 
The difference between theory and reality is that, in theory, there is no difference between theory and reality.

stegosaurus

Re: Sharpshooting
« Reply #2 on: August 26, 2010, 02:32:01 PM »
Thanks so much for the website... that was exactly what I was looking for. I'm going to start doing my research. When the time is right, I will start small and look into those Remington's or a similar rifle to yours. I like the simplicity of those. For future reference, what would it take to build something like an AR into a long range rifle? I seen some on Youtube but they look like a fortune to build.
"When you outlaw guns, only the outlaws have guns."

2aHawaii

  • Administrator
  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 3629
  • Total likes: 67
  • Sheepdog
  • Referrals: 17
    • View Profile
    • 2aHawaii
Re: Sharpshooting
« Reply #3 on: August 26, 2010, 02:57:49 PM »
For the AR build, I would start with the AR-10 platform to get a larger round.

For purists, the "AR-10" is only manufactured by ArmaLite, but there are many similar models made by DPMS, Bushmaster, Knight's Armament Company, etc..

I've heard great things about the DPMS offering with regards to price/value. You can then choose a .260 or .308. Just add a free float handguard and scope then see where you are at. From there you can change out the barrel with a match grade one and handload to increase your accuracy. Sounds like fun to me. :)
I am not a lawyer.

"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." - United States Constitution Amendment 2 & Hawaii State Constitution Article 1 Section 17

Buying from Amazon? Click through here

stegosaurus

Re: Sharpshooting
« Reply #4 on: August 26, 2010, 06:27:53 PM »
Thank you for the tips, 2a. I will look into your suggestions. I actually remember the AR-10 as a sniper rifle on the SOCOM: Navy Seals game on Playstation 2, haha.

This is the Youtube video of the AR-15 I was talking about:


His barrel is really long. Do you really need a barrel like that? Does a barrel that length help with accuracy or increase range?
"When you outlaw guns, only the outlaws have guns."

Tom_G

Re: Sharpshooting
« Reply #5 on: August 26, 2010, 06:38:32 PM »
While there is some relationship between barrel length and accuracy, it only holds to a point.  You won't see many short barrels at a long range competition, but there's a point of diminishing returns when the extra length becomes a liability rather than an asset.  24" - 26" seems pretty typical.  Long enough to get the bullet stabilized and moving at its best velocity, no longer.
The difference between theory and reality is that, in theory, there is no difference between theory and reality.

2aHawaii

  • Administrator
  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 3629
  • Total likes: 67
  • Sheepdog
  • Referrals: 17
    • View Profile
    • 2aHawaii
Re: Sharpshooting
« Reply #6 on: August 26, 2010, 08:08:22 PM »
The long barrels can introduce flex and ruin the balance of a rifle. I'd go with anything in the 20"-24" range.

I thought it was funny that the AR-15 video had all this "tactical" stuff, Larue and Badger gear, and then had an NCStar scope up top. :P

Oh, another thing about the AR-15 platform is that many times the mags won't fit the high grain bullets (77-80 gr.). From what I remember, the farthest they can shoot accurately is about 800 meters in the AR-15 platform.
I am not a lawyer.

"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." - United States Constitution Amendment 2 & Hawaii State Constitution Article 1 Section 17

Buying from Amazon? Click through here

Heavies

Re: Sharpshooting
« Reply #7 on: August 27, 2010, 01:15:45 AM »
Hey Steg,
Nice to hear you interested in long range.  I shoot with Puuloa Rifle and Pistol Club out in Ewa Beach. This club mostly consists of High Power Rifle and Service Rifle type shooting, but we also have a steadily growing number of F-Class shooters.

Here are some good reads I have found...
www.snipercountry.com/training.html   -Good info on proper marksmanship techniques, and other cool to know sniper stuff. :)
www.rifleshootermag.com/shooting_tips/determing_wind_values/   -artical by famous sniper Maj. John Plaster on reading wind. a little overkill for known distance, but still good info.
http://www.nrahq.org/compete/RuleBooks/HPR/hpr-index.pdf    -rules for High Power Rifle and F-class.
www.6mmbr.com  -tons of good stuff on accurate rifles
http://www.6mmbr.com/TacticalFroggyA1.html     -Bi-pod shooting tips

I would recommend a good heavy barreled bolt gun from Remington or Savage would be a good place to start. Remington 700 have tons of aftermarket parts for you to upgrade if you see fit. Savages have what is called a floating bolt head, which lends it self to accuracy, and also has the barrel attached with a barrel nut.  This nut allows you to change the barrel yourself, with a few easy to acquire tools and research. Many companies have pre-fit custom Savage barrels that you slap on yourself.  One thing about factory rifles is, it's a crap shoot to get a very accurate out of the box rifle.  They are accurate for most purposes, but a 1/2 MOA gun out of the box is hard to find.
AR style rifles are good for mid range work, but I am not sure if it would be a good choice for longer shots. Of course I have very limited experience with these rifles, so I would know for certain.

Basic components that long range rifles share for F-Class type competition is a good heavy barrel, scope, and a good solid stock.  You need a heavy type barrel because in competition the course of fire requires you shoot at least 51 rounds during the day, usually more, and the extra thickness helps dissipate heat.  Also, the thicker metal makes the rifle more accurate by being more stiff.  The length of the barrel is more a function of velocity than accuracy.  The more length you have on  barrel, the more "free" velocity you can achieve.  By "free" I mean the powder gasses have more time to push on the bullet inside the barrel.  For mid range (up to 600yards) 24 to 26" should be sufficient, true long range (out to 1000yards) some go even longer.

You might want to look into reloading. You need very good (consistent) ammo for longer shots.  Most off the shelf stuff won't cut it, and match ammo is pricey. You would never see the full accuracy potential in the rifle with generic ammo.  I would never be able to shoot my Rem 700 BDL at 600 yards with the shelf stuff! ;D

A decent build I am trying to do is running me around $1100 for the action and stock, a Timed and trued Savage Target Action and SSS LVT stock, Mcgowen Precision Barrel ran about $350, scope is  a Sightron SIII 20X42mm (good middle of the road optic, great value IMO) was about $600 with rings and mounts, and a good quality bi-pod runs $90 plus.

The club I shoot with is Puuloa Rifle and Pistol Club(PRPC).  Info and contact information can be found HERE.  It's a good club, but sometimes they announce stuff the last minute.  They have just re-started again after a hiatus, and are still trying to really get organized. They also have restrictions on rifle caliber, (mostly .223 .308, .30-06, and some others) so if you want to shoot an odd caliber you would want to ask them first.

Can you call them Sniper rifles?  Hey why not.. More of a tool for a specific job.

Now, let me say that I am quite new to this too. I am still learning, but any information I have I am happy to share. :thumbsup:
Good shooting,
B
« Last Edit: August 27, 2010, 02:24:43 AM by Heavies »

Heavies

Re: Sharpshooting
« Reply #8 on: August 27, 2010, 01:20:52 AM »
Quote
NCStar scope up top
:rofl:

That got me too...
Quote
Oh, another thing about the AR-15 platform is that many times the mags won't fit the high grain bullets (77-80 gr.

The guys that shoot service rifle usually switch to single feeding the heavier bullets at anything past 300yards.  You need those heavier bullets for 600 yards in the .223.  The regular 55 grain stuff will get blown all over, if it is even stable out that far. :)

Deeeeviant

Re: Sharpshooting
« Reply #9 on: August 27, 2010, 08:10:26 AM »
www.snipershide.com

Check out their forums. I highly encourage you to enroll in the online training as well. The initial price is a little steep, but it taught me a lot.

You don't need to spend a fortune for your first long range rifle. Like others mentioned a Remington 700 is a good base. Even a Savage will get the job done. The gun is only as accurate as the shooter.

AR platforms are highly capable of long range shots, however it requires more on your part to accurately put the round out there. Since there are more moving mechanical parts, there is more of a chance for something to blow your shot.

Either way, research as much as you can before you jump the gun. Buy once, cry once. Though at the same time, don't over extend yourself financially on a starter rifle.

stegosaurus

Re: Sharpshooting
« Reply #10 on: August 27, 2010, 07:00:37 PM »
Thanks for all the tips and suggestions, guys :shaka: I really appreciate it. And thanks for all the links and info, Heavies. Gonna load up on the research.. probably be a while until I'm ready to make a purchase anyway.

Roughly how much do Remingtons go for locally?
"When you outlaw guns, only the outlaws have guns."

Heavies

Re: Sharpshooting
« Reply #11 on: August 28, 2010, 04:28:24 AM »
IIRC my brother picked up his Remington 700 PSS for about $1100 or 1200 at Magnum.
http://www.remingtonle.com/rifles/700p.htm

It came with the HS precicion stock, but that stock just didn't seem to fit right. so he changed it to a Bell & Carlson.


Savage also makes a dedicated target type rifles specifically for F-Class type shooting.
http://www.savagearms.com/firearms/model/12%20PALMA
http://www.savagearms.com/firearms/model/12%20FTR
http://www.savagearms.com/firearms/model/12%20F%20CLASS
These are all single shot, and have long barrels, so they are pretty much dedicated target rifles.
They also have tactical versions.
http://www.savagearms.com/firearms/model/10FCPHS
http://www.savagearms.com/firearms/model/10FCP-McMILLAN

Do lot of research on what you want to do, exactly, with the rifle.  You need the Right tool for the right Job... 
That way you can get something that will fit your purpose from the start. 
However, you'll probably just end up gettin' more rifles, They have a tendency to multiply.

As soon as I get all my parts for my rifle in I'll do a post of how to put together a custom Savage, It's not that hard to do. I hope...hehe. :P

Tom_G

Re: Sharpshooting
« Reply #12 on: August 28, 2010, 08:36:17 AM »
That Savage F-Class is so ugly that I love it!  a tube sticking out of a slab!!  Gah, if they offered it in something I could afford to shoot, that may be the one rifle I would buy on looks alone!
The difference between theory and reality is that, in theory, there is no difference between theory and reality.

Heavies

Re: Sharpshooting
« Reply #13 on: August 28, 2010, 09:25:11 AM »
I have see a few folks at kokohead with the 6mmbr version, and also the Palma version. IMHO I love the Palma stock, but with the 12 twist barrel you are limited to the lighter .30 cal projectiles. Both I've seen shot  Very accurate. With a 30" barrel 100 yards is too close to be testing/shooting.  ;)

Deeeeviant

Re: Sharpshooting
« Reply #14 on: August 28, 2010, 07:56:10 PM »
I sourced my Remington 700 SPS (not the tactical, just the base sps) for $600. With a Farrel scope mount and a SWFA 10x scope, I have a beginner precision stick for a little $1000

Heavies

Re: Sharpshooting
« Reply #15 on: August 28, 2010, 08:18:37 PM »
Quote
I sourced my Remington 700 SPS (not the tactical, just the base sps) for $600. With a Farrel scope mount and a SWFA 10x scope, I have a beginner precision stick for a little $1000

That's a sweet deal!  :D  Also, you could look for good used set ups on gunbroker.com or snipershide.com and do an ffl to ffl transfer. You might be able to find exactly what you want set up with scope, stock, and bipod. If you buy from local shops you might not always get the best deal.

Old Guy

Re: Sharpshooting
« Reply #16 on: September 08, 2010, 05:10:32 AM »
Another way you can get started is to find a Used hunting rifle in the Caliber that you're interested in.  Shoot the hell out of it til you're shooting better than the rifle can group.

By then, you have a good idea  of how things go Bang and if you really want to get more into it.  If not, you're not out a lot of $.  You might be able to sell if for close to what you paid for it.

Suggest that you look at a 30-06 (really old school) or 308.  Both are great for out to 1,000 yards.   

In either case, reloading is a must for best accuracy.

Heavies

Re: Sharpshooting
« Reply #17 on: September 08, 2010, 05:31:34 AM »
Quote
Another way you can get started is to find a Used hunting rifle in the Caliber that you're interested in.  Shoot the hell out of it til you're shooting better than the rifle can group.

By then, you have a good idea  of how things go Bang and if you really want to get more into it.  If not, you're not out a lot of $.  You might be able to sell if for close to what you paid for it.

Suggest that you look at a 30-06 (really old school) or 308.  Both are great for out to 1,000 yards.   

In either case, reloading is a must for best accuracy.
Out of necessity that is exactly what I did.  ;D
Also reloading for this type of rifle really taught me alot about what works and what doesn't. Also, it was very satisfying to get a rifle that shot 2" groups at 100 down to cosistantly shooting under 3/4 of an inch! Gotta love a .30-06!