Handgun cleaning (Read 8213 times)

stegosaurus

Handgun cleaning
« on: September 07, 2010, 10:29:33 PM »
What kind of cleaning kit do you guys use? I am using the Mil Pro 7 stuff that OGC Tactical stocks (cleaner, oil, copper remover). What do you guys prefer? Here's some random stuff I came across on the net (any impressions on these?):

Hoppe's No. 9 cleaner
Rem oil (for inside barrel)
Break Free oil (for outside barrel)
Shooter's Choice High Tech grease (for lubricating rails)
Ballistol (for cleaning AND oiling barrel)
"When you outlaw guns, only the outlaws have guns."

2aHawaii

  • Administrator
  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 3629
  • Total likes: 67
  • Sheepdog
  • Referrals: 17
    • View Profile
    • 2aHawaii
Re: Handgun cleaning
« Reply #1 on: September 08, 2010, 12:10:49 AM »
I just use Break Free CLP...for everything :)
I am not a lawyer.

"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." - United States Constitution Amendment 2 & Hawaii State Constitution Article 1 Section 17

Buying from Amazon? Click through here

tonsofguns

Re: Handgun cleaning
« Reply #2 on: September 08, 2010, 02:38:07 AM »
I use simple green and a toothbrush, a bucket of water for rinse, and a liberal amount of CLP and rags. Works wonders.
For the barrels I use either a boresnake or a one piece fiberglass rod. Good luck.

Old Guy

Re: Handgun cleaning
« Reply #3 on: September 08, 2010, 04:59:05 AM »
I use baby wipes for immediate before i leave the range for general wipes.

Since I have a LOT of gun cleaning struff, what ever comes to hand and is easiest to use.

More if I really want a gun clean enough to eat off.

Lots of old underwear, t-shirts and other Soft cloths get used too.  I also cut my own cleaning patches.

Tom_G

Re: Handgun cleaning
« Reply #4 on: September 08, 2010, 08:24:59 AM »
For most things, I use Break-Free CLP as cleaner, lubricant, and protectant.  I love one-stop shopping!

I cut my own patches from old t-shirts and underwear for everything except .22.  I but .22 patches because the material is thinner... a t-shirt thickness patch gets pretty jammed in a .22 barrel.

I keep Teflon-based white grease for guns that need more, such as my M1 Garand.

Have lots of Hoppes #9 on hand for soaking.  Either dropping parts into a container, or slopping it thru a barrel then setting the gun muzzle-down on some newspaper to drain.  Time plus Hoppes yields some fantastic results on stubborn deposits!

Also Hoppes copper solvent, Sweets copper solvent, and straight household ammonia for varying degrees of copper fouling.  When you collect hundred-year-old military rifles, they sometimes come with a hundred years of barrel buildup.  Straight ammonia is the shortcut for these situations.

Most of my rags started lif as t-shirts as well. 

I've tried lots and lots of products over the decades.  Until I tried Break Free CLP, nothing compared to Hoppes #9.  Now those 2 products satisfy 97% of my cleaning and maintenance needs. 
The difference between theory and reality is that, in theory, there is no difference between theory and reality.

Jaydawg

Re: Handgun cleaning
« Reply #5 on: September 08, 2010, 09:40:09 AM »
CLP believer here.

Thanks for the tip on white grease.

Deeeeviant

Re: Handgun cleaning
« Reply #6 on: September 08, 2010, 05:26:16 PM »
CLP to preserve the bore
Bore-Tech Carbon and Copper Remover for more detailed cleaning
Slip 2000 EWL or M-Pro 7 for lubrication

stikiller

  • Guest
  • Trade Count: (0)
Re: Handgun cleaning
« Reply #7 on: September 08, 2010, 09:06:09 PM »
Been using this stuff for a while, with some good results so far.

1. Simple Green (overal weapon)
2. Hoppes #9 (barrel)
3. Rem Oil (overal Weapon)

Heavies

Re: Handgun cleaning
« Reply #8 on: September 08, 2010, 09:35:55 PM »
Can/do you use simple green on blued steel? Or just stainless, polymer, and coated steel?

I mostly use clp on every thing. Hoppes gun oil made into a paste with HBN (hexagonal boron nitride) for slides or moving parts.

I have heard that clp is not good for long term storage. Better to wipe down with a good gun oil for that. I usually clean all my stuff at least once a month anyway.

stikiller

  • Guest
  • Trade Count: (0)
Re: Handgun cleaning
« Reply #9 on: September 08, 2010, 09:59:53 PM »
Heavies - I only use SG for detail stripping and I dry the parts thoroughly before lubing and reassembly.  I have heard that the the military forbids it's use on aluminum parts.  SG also will strip off blueing.  I tend to run most of my lawnmower guns (GLOCKS and AR's) with a relatively high round count before cleaning.  These are the only platforms I will clean with SG.  So far no issues, but if any comes up, you'll be the first to know.   

Heavies

Re: Handgun cleaning
« Reply #10 on: September 08, 2010, 10:11:18 PM »
Thanks stikiller, that's good to know. SG is some pretty harsh stuff, on some materials. Once I used it to clean my engine bay in my truck, and it ate up all the plastic under the hood. Good thing I sold that truck. Hehe.

stikiller

  • Guest
  • Trade Count: (0)
Re: Handgun cleaning
« Reply #11 on: September 08, 2010, 10:18:51 PM »
That's funny WRT the truck.  Yeah Man, we started to use SG in 2003 at the end of minor exchange of lead since our supply SPC had nothing but Simple Green.  It worked for the time being Man since we had no CLP.  What a way to learn. lol

Deeeeviant

Re: Handgun cleaning
« Reply #12 on: September 09, 2010, 05:58:56 AM »
CLP did better then most in the protection department under extreme conditions.

http://www.ar15.com/forums/topic.html?b=3&f=7&t=485547
http://www.ar15.com/forums/topic.html?b=3&f=7&t=502758

Heavies

Re: Handgun cleaning
« Reply #13 on: September 09, 2010, 06:43:45 AM »
Guess I heard wrong about CLP. That's good to know since I use it almost exclusively.
Here is an other test on clp and other protectants.

http://www.6mmbr.com/corrosiontest.html

stegosaurus

Re: Handgun cleaning
« Reply #14 on: September 09, 2010, 02:42:09 PM »
Hmm.. I guess I will have to pick up some CLR when it's time to resupply. Where is the best place to get it on island?
"When you outlaw guns, only the outlaws have guns."

Heavies

Re: Handgun cleaning
« Reply #15 on: September 11, 2010, 09:49:06 AM »
I usually get the spray can type CLP Breakfree
at sports authority.

Tom_G

Re: Handgun cleaning
« Reply #16 on: September 11, 2010, 10:14:52 AM »
I get CLP in a squeeze-spray bottle at Security Equipment.  Hoppes #9 is cheapest at Sports Authority.  And, oddly, their tiny bottles are a better price-per-ounce than their large bottles.
The difference between theory and reality is that, in theory, there is no difference between theory and reality.

stegosaurus

Re: Handgun cleaning
« Reply #17 on: September 11, 2010, 12:35:36 PM »
Oops, I meant CLP. Thanks, guys.
"When you outlaw guns, only the outlaws have guns."