Is this normal wear? (Read 9025 times)

stegosaurus

Is this normal wear?
« on: September 07, 2010, 11:21:23 PM »
Noticed this the other day while cleaning. This was after putting only 400 rounds through the Glock 19 Gen4. Notice the ring around the recoil spring assembly. I can't seem to clean it off and actually, the top half of the "ring" appears to be the finish of the slide coming off. I'm not trying to be a priss or anything but I just want to know if this is normal. Thanks!

[attachment deleted by admin]
"When you outlaw guns, only the outlaws have guns."

2aHawaii

  • Administrator
  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 3629
  • Total likes: 67
  • Sheepdog
  • Referrals: 17
    • View Profile
    • 2aHawaii
Re: Is this normal wear?
« Reply #1 on: September 08, 2010, 12:13:41 AM »
I'm not familiar with that kind of wear. If it is just the finish, don't worry about it. Glock's finish is embedded into the metal and is very hearty.
I am not a lawyer.

"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." - United States Constitution Amendment 2 & Hawaii State Constitution Article 1 Section 17

Buying from Amazon? Click through here

tonsofguns

Re: Is this normal wear?
« Reply #2 on: September 08, 2010, 02:28:54 AM »
I wouldn't worry...btw, why are you cleaning that thing in the first place!?!

Eta: I just saw your other post and answered my question, first gun. Now go throw it in the mud, roll it in sand, and stick it in the freezer!!!then put another 400 rounds through it. This is also a surefire genuine guarantee way of improving accuracy!
« Last Edit: September 08, 2010, 03:01:45 AM by tonsofguns »

Tom_G

Re: Is this normal wear?
« Reply #3 on: September 08, 2010, 08:32:41 AM »
Definitely not normal.  That's a part of the gun where there is no contact between moving surfaces and no exhaust gasses in normal operation. 

As symmetrical as it is, though, I'm more inclined to think that something went slightly awry in the finishing process.  That could be a tool mark where the slide was held during some stage of manufacture. 

Keep an eye on it.  If you've got something wonky enough inside that gun that gasses are bleeding out the recoil spring assembly, that ain't good.  I'm not saying that's the case, it most likely is NOT the case, but I don't believe in ignoring unusual things.
The difference between theory and reality is that, in theory, there is no difference between theory and reality.

vooduchikn

Re: Is this normal wear?
« Reply #4 on: September 08, 2010, 12:11:15 PM »
Steg,

I don't think that gas porting around the recoil spring is the cause. Gun action would be erratic and there would be evidence of gas residue on the recoil spring and all over the barrel underneath the slide. Doesn't sound like the case.

That is not normal, but also doesn't appear to be an issue. The only contact between parts would be the muzzle side of the slide up against the recoil spring (area where the wear ring is). Unless you have upgraded, the recoil rod and ends are high impact plastic. Plastic loses to Tenifer.

 What your seeing looks to me like a flaw in the finishing process on the slide. Tenifer is tough as hell and shouldn't do that. I would contact GLOCK and send them a picture. They should re-finish or replace it.  You can send the slide back without any interaction with an FFL or dealer.

Why you cleaning that gun at 400 rounds anyway?  ;D

Interactive exploded view (cool website)
http://www.genitron.com/Basics/Glock23/P2Glock.html

Chuck
Relax, I've banned myself..

stegosaurus

Re: Is this normal wear?
« Reply #5 on: September 08, 2010, 05:52:53 PM »
Haha, well.. as a Virgo, it's in my nature to keep everything clean at all times. It's almost OCD-like and I can thank mom for that. I'm well aware of Glock's reputation of being durable and reliable.. I've seen the Glock torture tests and as impressed as I was, I still couldn't help but cringe at the sight of the abuse. But it's something I'm working on, haha.

In any case, I will have to give Glock a call tomorrow and see what they have to say about it. Thanks, guys.
"When you outlaw guns, only the outlaws have guns."

stegosaurus

Re: Is this normal wear?
« Reply #6 on: September 14, 2010, 09:28:00 AM »
So after reviewing the photos I sent them, I finally heard back from Glock this morning. They said the wear is due to a manufacturing defect. When the nose ring was milled, the bit was moving too fast and the area got too hot which in turn caused the tenifer to adhere poorly. He assured me this is purely cosmetic and will have no effect on performance.

Now, my options. There is no way to refinish the slide but Glock is more than willing to replace the gun. Unfortunately, this would take several weeks. But it seems like they will replace the entire gun b/c his words exactly were "replace the gun" and not "replace the slide". I really only care about the slide but I thought that was a generous offer.

Understanding that I might not want to wait that long, he also offered me other forms of compensation. He first asked what state I was in and if we could use full cap mags. When I replied, his answer was "Wow, that REALLY SUCKS." He was going to offer me free mags but I guess they didn't have 10 rounders. He is also offering free night sights.

I told him I would think about it. I would really rather prefer they replace the slide but the night sights are somewhat appealing.

What would you choose?
"When you outlaw guns, only the outlaws have guns."

vooduchikn

Re: Is this normal wear?
« Reply #7 on: September 14, 2010, 09:54:21 AM »
Overall that is really good news.

I doubt they would replace the entire gun, but they may go through it, replace the slide, add night sights, etc.  Just make sure you clarify what is being done and ensure you get the same serial number back. In the long run, it would be worth it, thats my take.

If there is nothing wrong with the lower (doubtful). I would entertain calling them back and have them send just the slide back and them send you a replacement.

You can ship your gun straight to them for repair purposes without going through an FFL. I don't recall the exact procedures, but know it can be done.  Shipping just the slide is much easier.

Glocks customer service has always been top notch as are thier products..

mY.$02
Relax, I've banned myself..

2aHawaii

  • Administrator
  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 3629
  • Total likes: 67
  • Sheepdog
  • Referrals: 17
    • View Profile
    • 2aHawaii
Re: Is this normal wear?
« Reply #8 on: September 14, 2010, 01:37:58 PM »
The free mags would have been great, too bad they don't have the reduced cap ones. The night sites are great too. Good CS Glock!
I am not a lawyer.

"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." - United States Constitution Amendment 2 & Hawaii State Constitution Article 1 Section 17

Buying from Amazon? Click through here

stegosaurus

Re: Is this normal wear?
« Reply #9 on: September 14, 2010, 11:17:16 PM »
After a long debate with myself, I decided to have the slide replaced.

Another nice thing about Glock support.. due to the time difference, I have to call them on my drive to my morning job. I am not allowed to use my phone at work (elem. school) and by the time I get off, they are closed. Despite having the technician's e-mail, he gave me his cell phone number and said I could call him up until 10 pm EST (the time he sleeps) to let him know my decision  :thumbsup:
"When you outlaw guns, only the outlaws have guns."

Antithesis

Re: Is this normal wear?
« Reply #10 on: September 15, 2010, 12:09:10 AM »
^ Wow that really is some awesome customer service right there having the Glock technician's cell number. 
"Si vis pacem, para bellum"
If you wish for peace, prepare for war

Heavies

Re: Is this normal wear?
« Reply #11 on: September 15, 2010, 03:52:28 AM »
Quote
Despite having the technician's e-mail, he gave me his cell phone number and said I could call him up until 10 pm EST (the time he sleeps) to let him know my decision  :thumbsup:

Glock CS = The bomb...  Great customer service is such a rarity today.

stegosaurus

Re: Is this normal wear?
« Reply #12 on: September 15, 2010, 09:08:52 AM »
Isn't it, though? I am really impressed! Although it was a super nice gesture to give me his personal number, I still emailed him.. didn't want to bother him at home.

Anyway, I called again this morning to follow up and thank him (his name is Fred Burchard). I told him I decided to have the slide replaced. Again, he gave me options. I could have just the slide replaced or I could replace the whole gun. The downside to replacing only the slide would be that the numbers on the gun wouldn't match up. He said this really isn't a problem since the only number on the gun that matters is the serial on the frame. He did warn me that "some gunshow knuckle-dragger" might try to lowball me if I ever tried to sell the gun.

The second option would be to replace the entire gun. The downside to this is that it will take longer than replacing the slide (which would be about four weeks) and he couldn't give me a time estimate. I assume this also means I would have to register the gun with HPD again. No thanks! I am super impressed, though, that they even offered a brand new gun!

I decided to have just the slide replaced since the gun is still pretty much new and in good working order. No need to replace the whole thing. He said I could send in just the slide but preferred I send in the whole gun. If I send the whole gun, he suggested I go directly to the main UPS or Fedex facility and not the hub stores. Do we even have one? And yes, he said I didn't have to go through an FFL. Anyone know if this requires anything special in advance?

A huge thumbs up to Glock and Mr. Burchard!
"When you outlaw guns, only the outlaws have guns."

vooduchikn

Re: Is this normal wear?
« Reply #13 on: September 15, 2010, 09:16:32 AM »
Isn't it, though? I am really impressed! Although it was a super nice gesture to give me his personal number, I still emailed him.. didn't want to bother him at home.

Anyway, I called again this morning to follow up and thank him (his name is Fred Burchard). I told him I decided to have the slide replaced. Again, he gave me options. I could have just the slide replaced or I could replace the whole gun. The downside to replacing only the slide would be that the numbers on the gun wouldn't match up. He said this really isn't a problem since the only number on the gun that matters is the serial on the frame. He did warn me that "some gunshow knuckle-dragger" might try to lowball me if I ever tried to sell the gun.

The second option would be to replace the entire gun. The downside to this is that it will take longer than replacing the slide (which would be about four weeks) and he couldn't give me a time estimate. I assume this also means I would have to register the gun with HPD again. No thanks! I am super impressed, though, that they even offered a brand new gun!

I decided to have just the slide replaced since the gun is still pretty much new and in good working order. No need to replace the whole thing. He said I could send in just the slide but preferred I send in the whole gun. If I send the whole gun, he suggested I go directly to the main UPS or Fedex facility and not the hub stores. Do we even have one? And yes, he said I didn't have to go through an FFL. Anyone know if this requires anything special in advance?

A huge thumbs up to Glock and Mr. Burchard!

The main FEDEX hub is on LAGOON drive about half way down on your right. I would package that bad boy up correctly first... ;)

There are some specifics when mailing the gun in, but its not too difficult.  I had a buddy that just sent one of his 1911s in.
Relax, I've banned myself..

2aHawaii

  • Administrator
  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 3629
  • Total likes: 67
  • Sheepdog
  • Referrals: 17
    • View Profile
    • 2aHawaii
Re: Is this normal wear?
« Reply #14 on: September 15, 2010, 11:32:38 AM »
The downside to replacing only the slide would be that the numbers on the gun wouldn't match up. He said this really isn't a problem since the only number on the gun that matters is the serial on the frame. He did warn me that "some gunshow knuckle-dragger" might try to lowball me if I ever tried to sell the gun.

You know you'll never get ride of it :)
I am not a lawyer.

"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." - United States Constitution Amendment 2 & Hawaii State Constitution Article 1 Section 17

Buying from Amazon? Click through here

stegosaurus

Re: Is this normal wear?
« Reply #15 on: September 15, 2010, 02:25:56 PM »
The downside to replacing only the slide would be that the numbers on the gun wouldn't match up. He said this really isn't a problem since the only number on the gun that matters is the serial on the frame. He did warn me that "some gunshow knuckle-dragger" might try to lowball me if I ever tried to sell the gun.

You know you'll never get ride of it :)

Exactly what I told him :)

And thanks, Voodu.. I'm looking into it.
"When you outlaw guns, only the outlaws have guns."