Linked Events

  • Fall 2010 Great Guns gun show: October 02, 2010 - October 03, 2010

Fall 2010 Great Guns gun show (Read 26902 times)

2aHawaii

  • Administrator
  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 3629
  • Total likes: 67
  • Sheepdog
  • Referrals: 17
    • View Profile
    • 2aHawaii
Fall 2010 Great Guns gun show
« on: September 12, 2010, 12:42:40 PM »
The Hawaii Historic Arms Association is once again sponsoring their 67th semi-annual Great Guns gun show.

HHAA Great Guns 2010: A 200 table gun show
Neal Blaisdell Center Exhibition Hall
October 2, 2010 10AM-6PM
October 3, 2010 10AM-5PM
Admission $6.00

For more information call 942-8664

[attachment deleted by admin]
I am not a lawyer.

"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." - United States Constitution Amendment 2 & Hawaii State Constitution Article 1 Section 17

Buying from Amazon? Click through here

Dregs

Re: Fall 2010 Great Guns gun show
« Reply #1 on: September 12, 2010, 03:24:56 PM »
oh SWEET I was wondering when this was going to be. I figured they were done for this year.

So I only been to it once a long time ago. Now that I'm in the market to buy something new, what are the procedures there? Do you still have to do the 2 week wait for handguns? I imagine acquiring a longarm is no different than usual, but I heard gunshows are easier to get yer firearms. Might not apply to Hawaii eh?

Planning on buying a new handgun and maybe reloading supplies if I have anything leftover hehe.

tonsofguns

Re: Fall 2010 Great Guns gun show
« Reply #2 on: September 12, 2010, 06:17:56 PM »
Goody I can't wait

Old Guy

Re: Fall 2010 Great Guns gun show
« Reply #3 on: September 12, 2010, 06:51:32 PM »
I will most likely be at the LIFE table and hopefully Not buying out the place.......

Most times I am there on the first day of opening. 

Drop by and say Howdy.........

Heavies

Re: Fall 2010 Great Guns gun show
« Reply #4 on: September 12, 2010, 07:07:38 PM »
Quote
Do you still have to do the 2 week wait for handguns?

Yep. Gotta wait the 2 weeks. Work out payment with the seller, get all handgun info (written on a bill of sale signed by you and seller, address of you and seller, serial number, make, model, barrel length), take to the police to get your permit to aquire, wait 2 weeks, go back to the police to get the permit, take permit to the seller, pick up the handgun, take handgun to police to register. Feeew! Simple ain't it?! >:(
Rifle, as far as I know, can be taken home that day if you have you rifle permit and the cash. Then you register within the proper time period.

808shooter

Re: Fall 2010 Great Guns gun show
« Reply #5 on: September 21, 2010, 07:04:00 PM »
Never been to Oahu's gun show but I plan on going to this upcomming one in October.  I've also been almost ready to pull the trigger on my first AR 15. What do you guys think?  Should I wait till the show or is it not really "all that".  I'm looking for a new or like new AR that's on the less expensive side. 
 
I guess my question is, are there a good selection of tactial weapons at these gun shows or is it mostly historic firearms?  I'm kinda a "newer" firearm buyer and mostly into the tacticool stuff. 
 
Any info would really help me out, I mean i'm going either way, but there's a deal right now that i'm eyeing.  Thanks and hope to see some of you there.

vooduchikn

Re: Fall 2010 Great Guns gun show
« Reply #6 on: September 21, 2010, 07:08:51 PM »
Never been to Oahu's gun show but I plan on going to this upcomming one in October.  I've also been almost ready to pull the trigger on my first AR 15. What do you guys think?  Should I wait till the show or is it not really "all that".  I'm looking for a new or like new AR that's on the less expensive side. 
 
I guess my question is, are there a good selection of tactial weapons at these gun shows or is it mostly historic firearms?  I'm kinda a "newer" firearm buyer and mostly into the tacticool stuff. 
 
Any info would really help me out, I mean i'm going either way, but there's a deal right now that i'm eyeing.  Thanks and hope to see some of you there.


There is an AR for sell on here with some good parts for a great price...
Relax, I've banned myself..

2aHawaii

  • Administrator
  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 3629
  • Total likes: 67
  • Sheepdog
  • Referrals: 17
    • View Profile
    • 2aHawaii
Re: Fall 2010 Great Guns gun show
« Reply #7 on: September 21, 2010, 07:53:23 PM »
Octomon is selling a really, really nice AR at a great price. I'd pick that up if I were you. OGC tactical has a Delton MOE for $800 too, but octomon's has much better parts.
I am not a lawyer.

"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." - United States Constitution Amendment 2 & Hawaii State Constitution Article 1 Section 17

Buying from Amazon? Click through here

808shooter

Re: Fall 2010 Great Guns gun show
« Reply #8 on: September 21, 2010, 08:04:45 PM »
I know, that's a cool rifle.  Problem is i'm not qualified enough to guage the wear on a used one.  I know 1k rounds is not a lot for an AR, but I would feel better getting a new one for the same price.  (on my first AR)  And by no means am I suggesting the seller is not to be trusted.  I just don't wanna get myself into a rifle with unknown problems.  I am also aware that if i were to buy a Del ton AR with (fill in the blank) other parts, there may be hiccups too. 
 
Do you guys think there may be really good deals / selection of new ARs at the show?  Better than the OGC deal?
 
thanks

2aHawaii

  • Administrator
  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 3629
  • Total likes: 67
  • Sheepdog
  • Referrals: 17
    • View Profile
    • 2aHawaii
Re: Fall 2010 Great Guns gun show
« Reply #9 on: September 21, 2010, 08:13:06 PM »
My guess is there won't be any better deals readily available on the island. You could always order a Del-ton kit and get a lower receiver locally. That would be the cheapest route but you have to put some of it together yourself. The quality of Del-ton isn't quite as good as BCM but it's not crap either. CMMG also has their bargain bin rifles but they are on par with del-ton and you have to have it shipped through an FFL.
I am not a lawyer.

"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." - United States Constitution Amendment 2 & Hawaii State Constitution Article 1 Section 17

Buying from Amazon? Click through here

808shooter

Re: Fall 2010 Great Guns gun show
« Reply #10 on: September 21, 2010, 08:56:40 PM »
wow CMMG prices are unreal.  Thanks for that link.  The one thing that makes me hessitate is the "ammunition warning" on the top of the site.  It says that if you use Wolf, you void the warranty.  Wow, I am planning on using Wolf and other steel cased ammo initially due to cost.  Man!  didn't know ARs were this confusing.  i'm now reading the AR15.com ammo oracle on the .223/5.56 opinions.  Does anyone use/shoot 5.56 ?? 
 
Is ar15.com the best resource for a AR newbie? 
 
thanks for all the responses, i really appreciate the info. 

2aHawaii

  • Administrator
  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 3629
  • Total likes: 67
  • Sheepdog
  • Referrals: 17
    • View Profile
    • 2aHawaii
Re: Fall 2010 Great Guns gun show
« Reply #11 on: September 21, 2010, 10:03:06 PM »
ar15.com is a great resource but feel free to ask any questions here. We have quite a few knowledgable guys on these boards :)

I wouldn't worry about the warranty issues. If you need anything fixed it's probably something you can do yourself with a little help. I also haven't heard of any issues with wolf ammo.

I have a 20" rifle-length AR15 if that's any comfort. I run Hotshot .223 through mine. I picked up a case for about $400 from OGC.
I am not a lawyer.

"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." - United States Constitution Amendment 2 & Hawaii State Constitution Article 1 Section 17

Buying from Amazon? Click through here

stikiller

  • Guest
  • Trade Count: (0)
Re: Fall 2010 Great Guns gun show
« Reply #12 on: September 21, 2010, 11:19:17 PM »
808shooter - It is possible to break your AR extractor with WOLF ammunition over time. I did it during a shooting class in Houston.  I swore never to use Wolf unless it was an extreme emergency. Brass expands wear as steel dose not.  If you are going to use WOLF, upgrade your extractor with parts from Brownells.

I personally have been to various shooting schools on the mainland ( about 349 hours worth) were the average round count starts at about 1500 - 2000 rounds over two/three/five days.  I had the opportunity to take class with EAG Tactical and Trident Concepts last year before moving here.  From our fox hole the guys who decided to go cheap damaged their AR's by using reloads and WOLF.  They slowed the class down and spent their day on the "fumble" table.   Now we can not do this kind of training in Hawaii, but I just wanted to give my recommendations.  WOLF is great for the AK-47 and other Russian weapons in my opinion.  At Gunsite's Foreign Weapons course (this was back in 2005), this was brought up all the time when it came to using Wolf in AR's.  I like the brand but when you see classmates who are using brass extractor kits and replacing the extractor on their  bolt group something is up.  I also wanted to let you know that I am not an armor, and I have always trusted what my gunsmith  tells me.  Most of my AR's range from the venerable M&P15 series, Rock River Arms, and Stag.  Over the years these have worked for me and these platforms do quite well in these schools.  Pat Roger, EAG Tactical, has documented proof as to which guns in his 20 plus years experience fair well in the class.  Most of the weapons in my inventory fall between Tier 1 and 2.   Nothing wrong with Del Ton, Double Star, Olympic Arm, DPMS.  It's good to start low and work your way up.  Builds are nice, but companies that have a warranty are even better. 

It's too bad we are limited to "Running the Gun" with  Kokohead rules.  However, I heard you can do some sort of training at the HRA Fun Shoots.  Barracades, TAC/EMR/ADMIN Reloads, Weak Hand Manipulation, NSRs and so on.   I have yet to attend.  Also if your barrel is stamped with 5.56 you can shoot .223 as well. but not the reverse. 

One more thing.  Do not get overwhelmed the amount of the stuff people load up on the AR.  "Let you mission drive you gear and not your gear drive you"- Jeff Gonzales  It is so true.  You would be amazed at how much crap people put on their AR.  Start small and see what you are using it for in order to save money, time, and effort.

Internet sources are great but it's TMI-Too Much Information.  I have also experienced problems with LMT, Ruger, POF, Robinson Arms, and Bushmaster.  While other I know swear up an down by these systems.  It's a crap shoot but you just have to define what you are using it for.  I'll stop rambling....so sorry for the long post!

I hope this helps!

stikiller

  • Guest
  • Trade Count: (0)
Re: Fall 2010 Great Guns gun show
« Reply #13 on: September 21, 2010, 11:24:56 PM »
These guys also deliver to FFL dealer in Hawaii:http://cdnninvestments.com.p2.hostingprod.com/CDNN-Catalog/CDNN2010-3/index.html

Check out pagers 36 and 37, you might be surprise.  If not apologize for wasting your time.

SK

Heavies

Re: Fall 2010 Great Guns gun show
« Reply #14 on: September 22, 2010, 04:11:37 AM »

I'm am not an AR-15 guy, but I do know that LTM (Lewis tool and machine) and BCM (Bravo Company Manufacturing) is supposed to be very good. I don't think you'll be able to find anything better on island at that kind of price.
Do ALOT of research on the platform and get what will suit your purpose for the gun.    Can't expect a tactical type AR to shoot tiny groups at 100yrds, or a accurized AR may or may not be too dependable with all types of ammo.
I have shot a few AR's and a RRA (Rock River Arms) owned by my brother is a very accurate shooter, very nice two stage trigger as well. The price, I believe, was almost twice that of what is being asked here.
Too bad our rifle range does not really have a set-up for tactical type shooting of these types of arms.  Shooting an AR at 50 and 100 yards from the bench, with only 5 rounds in the mag, at speeds that grandma would be saying was slow,  just is not fun to me. Just my $.02.
The gun show may or may not have something that you are looking for. Usually they have quite a bit of AR types as well as other sorts of weaponry, but don't expect a huge selection like those available at mainland kind of gun show.

stikiller

  • Guest
  • Trade Count: (0)
Re: Fall 2010 Great Guns gun show
« Reply #15 on: September 22, 2010, 08:29:10 AM »
808shooter - saw the rifle and it is a good price but it's a kit bash rifle.  ROCK RIVER ARMS is running a special for an Elite Operator 2 for about $1000.00  It comes with a 2 stage trigger, Ergo Grip, OPCAR STOCK, choice of rear sight, 2 mags, hard case, Quad Rail (free float), Muzzle Break, and the bolt carrier group is chromed.  It's brand new!  http://www.rockriverarms.com/index.cfm?fuseaction=category.display&category_id=462 

It does MSRP for about 1600 but they are going for 1000.00 right now.  Cant beat!  You will get a kick out of the two stage trigger, trust me on this one.

SK

808shooter

Re: Fall 2010 Great Guns gun show
« Reply #16 on: September 22, 2010, 10:44:24 AM »
Wow, thanks guys thats a whole day's worth of info to consider.  For a couple hundred more, I might consider a matched complete rifle or even the RRA tactical.  Was budgeting $1000 for the complete rifle, sights if need, and some ammo to start.  So I may now just go with a good quality rifle and pay-as-I-shoot ammo.  Man, that CDNN magazine is awsome!  Never seen that before.  Also thanks for the RRA sale headsup.  RRA was never even considered because i thought they had prices and quality out of my range.  I am now reconsidering that.  A couple years ago when I was then in the market, their ARs were backordered because of new LE contracts. 
 
wow, this forum is great... I really appreciate all the info.  When  I make a decision, i'll let you know. 

stikiller

  • Guest
  • Trade Count: (0)
Re: Fall 2010 Great Guns gun show
« Reply #17 on: September 22, 2010, 04:19:14 PM »
No worries Man!  I just wish someone had told me all of this before I stared over 10 years ago.  Good luck and please take your time.  There will always be AR's and Asymmetric Weapons (ACR,SCAR) for a while and their prices will continue to drop despite the 2008 sudden rush to overload the market by inflating weapon prices.


Peace! 

808shooter

Re: Fall 2010 Great Guns gun show
« Reply #18 on: September 24, 2010, 07:37:35 AM »
Was just reading a thread on ar15 talking about high-cap mags and read a post where there are signs @ HPD on the barrels having to be 16 without the flash hiders.  If I buy a complete AR with a 16" barrel, which is actually a 14" with a 2" flash hider am I going to run into problems? 
http://www.ar15.com/forums/topic.html?b=8&f=43&t=243379&page=2
about half way down, posted by "cheap1"

Anyone hear any problems with this? 

2aHawaii

  • Administrator
  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 3629
  • Total likes: 67
  • Sheepdog
  • Referrals: 17
    • View Profile
    • 2aHawaii
Re: Fall 2010 Great Guns gun show
« Reply #19 on: September 24, 2010, 07:53:47 AM »
As long as the flash hider is permanently attached, pinned and welded, you should be okay. That is the federal standard. I haven't heard any local laws where it would be a crime.
I am not a lawyer.

"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." - United States Constitution Amendment 2 & Hawaii State Constitution Article 1 Section 17

Buying from Amazon? Click through here