new grips for my SP101
I had wood grips from Ebay that never did fit properly.  so I dremeled the inside to get it to fit, but I dremeled too much and then it was loose and would move when I shot it.  so my mistake.
so I trashed those wood grips and got some grips from Altamont.  this is their snakeskin combo grips.
I like the checkering on the inserts and the checkering on the rubber grip front and back.  the stock rubber grips on a SP101 is smooth, no checkering
feels like it grips more, but I haven't tested it yet at the range.

Love this FNX 45 Tactical

Love this FNX 45 Tactical

that's nice
I wanted one of those

Ruger GP100 Match Champion


1909 Argentine Mauser




1873 Springfield Trapdoor 45-70


Remington 1100 12-ga

Geez
Santa came pretty early, huh?

Custom hand built flintlock rifle, called a "Boone Gun" from Don Bruton.
38" Colerain swamped .45 cal. barrel [correction], turns for patched round ball
Beautiful curly maple stock, hand carved and shaped by Don
Hand forged iron butt plate, trigger guard, trigger, and inlays

The pictures do not do it justice. In hand, one can feel the love and hard work that was put into this build.  The depth and character of the wood and steel are amazing.  It just seem to have a soul...   It wasn't cheap, worth every penny.  This will be passed down, hopefully for many many generations.

Wow
It's beautiful

Wow
It's beautiful

whoa

are you going to shoot it?

whoa

are you going to shoot it?

Of course!!!  I don't spend that kind of money, and not use it!  LoL   As we 2Aers like to say a lot, it's a tool.  A very pretty tool, but none the less, a tool.

Dispel the myth that black powder is hard to deal with, it causes rust, blah blah.....    IMHO, talking strictly muzzle loaders, it's actually easier to clean and deal with than smokeless.  All you need is some soap, water, WD-40, ballistol.  Everything clean and dry in 15-20 miniuntes tops..  Plus it is a blast of a good time!

Maybe tomorrow...  See where she's shooting, hopefully good zero at 50yards.

Of course!!!  I don't spend that kind of money, and not use it!  LoL   As we 2Aers like to say a lot, it's a tool.  A very pretty tool, but none the less, a tool.

Dispel the myth that black powder is hard to deal with, it causes rust, blah blah.....    IMHO, talking strictly muzzle loaders, it's actually easier to clean and deal with than smokeless.  All you need is some soap, water, WD-40, ballistol.  Everything clean and dry in 15-20 miniuntes tops..  Plus it is a blast of a good time!

Maybe tomorrow...  See where she's shooting, hopefully good zero at 50yards.

I hope to see it on the range someday
it's so purdy...

Custom hand built flintlock rifle, called a "Boone Gun" from Don Bruton.
.45 Cal 38" round bottom grooved Rice Barrel, turns for patched round ball
Beautiful curly maple stock, hand carved and shaped by Don
Hand forged iron butt plate, trigger guard, trigger, and inlays

The pictures do not do it justice. In hand, one can feel the love and hard work that was put into this build.  The depth and character of the wood and steel are amazing.  It just seem to have a soul...   It wasn't cheap, worth every penny.  This will be passed down, hopefully for many many generations.

Whoa, that is really pretty, you should go kill a Turkey with that...

wow.  beautiful "Boone gun" !   

new black laminate grips for my Single Ten, and new knife: Boker Arbolito Buffalo Soul 42

Merry Christmas to me.

Got a NF scope at regular price.  Hope to sell the NF Ruger 10/22 to lower the cost of the scope.
Any takers on the NF Ruger 10/22?   If they don't run out....

                                             http://nightforceoptics.com/1022

Where did you buy the scope?  Online?  LGS?   

Anschutz North America Custom Shop

Anschutz 54.18 repeater in BR-50 stock.
  Lilja 24" barrel free-floated, epoxy-bedded receiver
  5018  2-stage trigger  2oz/2oz
  Trigger, action, and bolt tuned
  BR-50 stock machined & inletted to add magazine assembly

Nightforce 15-55x 52mm scope

Accuracy 1st scope level

Kelbly rings

Received from ANA on Wednesday, will shoot it this weekend.

Where did you buy the scope?  Online?  LGS?   

Giveaway still on until 12/31/2017.  Kicker is that you have to buy it at full retail, no discount.
If discounted, no free rifle.

EuroOptics.com, but Midway, OpticsPlanet are authorized dealers, among others.

Anschutz North America Custom Shop

Anschutz 54.18 repeater in BR-50 stock.
  Lilja 24" barrel free-floated, epoxy-bedded receiver
  Trigger, action, and bolt tuned
  BR-50 stock machined & inletted to add magazine assembly

Nightforce 15-55x 52mm scope

Accuracy 1st scope level

Kelbly rings

Received Wednesday, will shoot it this weekend.

NICE!!!

new black laminate grips for my Single Ten, and new knife: Boker Arbolito Buffalo Soul 42

That's a nice blade.  Been looking at getting a (or a few) fixed blades recently myself.   

That's a nice blade.  Been looking at getting a (or a few) fixed blades recently myself.   

you can never have too many blades.