not the A-team,
the AR-team!   

My P226 legion...

Recent Noveske builds and latest aquisition, Rem ACR...

yesterday winds were 30+ mph with gusts even higher
but was a good day anyway
as you can see wasn't that crowded
weekday is much better
better than going to work 

now the scope is longer than the barrel. 

Mk12 Mod 1

NICE!!!

Mk12 Mod 1

I briefly talked to you about your clone on Sunday. I still want to build a 22LR Mod H someday.

Here's my SPR build.

I briefly talked to you about your clone on Sunday. I still want to build a 22LR Mod H someday.

Here's my SPR build.

You should, it's tons of fun shooting 22LR, especially at 100 yards...it's like shooting 223 at 600 yards. I think it makes you a better wind reader.

So I went with 22LR cause I already have an 18" 223 centerfire gun so why build another one. Plus obviously with 22LR there's no need to reload, clean as often, and a 22 is just in general a fun grab and go to the range caliber.

This is my centerfire "spr" with and without the surefire socom "training" can.

FYI I spoke to allen engineering to make a fake model 12 can. They didnt want to do it cause they couldn't guarantee that the can wouldnt affect the decibel level per ATF rules.

my single action family.  all Rugers of course.
Super Blackhawk 4.6" barrel 44mag
Single Ten 5.5" 22LR
New Vaquero 3.75" 45acp

.44 Magnum

.44 Magnum

Nice! What are the loads for the LSWC and the Sierra HP?

Nice! What are the loads for the LSWC and the Sierra HP?

...
Yeah...what's under the bullets?
Are those sierra 180s? See pic attached
...
Zooming in on the photo, I don't see much crimp.
I like to get a little more bite into the cannelure groove.

those are Sierra 240 grain JHC.  and 240 grains LSWC.
same load for both, 15.5 grains of accurate #9
I've done this load before.  lower velocity target loads.  easy on the hands.  feels like 44sp.  I don't have a chronograph, so I just use my palm chrono.
getting ready for my new 3" barrel Vaquero in 44magnum with birdshead grip.
I figure I better make some lighter loads for this one.

those are Sierra 240 grain JHC.  and 240 grains LSWC.
same load for both, 15.5 grains of accurate #9
I've done this load before.  lower velocity target loads.  easy on the hands.  feels like 44sp.  I don't have a chronograph, so I just use my palm chrono.
getting ready for my new 3" barrel Vaquero in 44magnum with birdshead grip.
I figure I better make some lighter loads for this one.

...
Perfect.
I like to load 180 sierras with 30something H110. Great fun load for letting friends shoot.
Big flash bang but little recoil. Damn accurate too.

...
Yeah...what's under the bullets?
Are those sierra 180s? See pic attached
...
Zooming in on the photo, I don't see much crimp.
I like to get a little more bite into the cannelure groove.

that's a cool picture with the muzzle flash! 

that's a cool picture with the muzzle flash! 

...
Typically, I'll order an 8x10 glossy suitable for framing and give it to my shootin' friends.
It's a great souvenir.
That 180 gr/ H110 load would look awesome from that 3" revolver.

Just picked up the G19 Gen4 twins today for the Mrs (with beaver tail) and I's anniversary. Huge Mahalos out to Henry over at Prime Sports! Can't wait for those G43's up next!

 

Just picked up the G19 Gen4 twins today for the Mrs (with beaver tail) and I's anniversary. Huge Mahalos out to Henry over at Prime Sports! Can't wait for those G43's up next!

...
Awesome