This morning, 24 Mar 2013, 7:13 AM MST. It was reduced to 20% by 20% from the original size. No other modifications, The sun is just getting over the top of the building, as revealed by the top parts of the trees being illuminated by it.
When I clamped it to a picket on my back balcony railing last night, there was already about 3" of snow. It then filled up and over flowed.
You folks in the warmer climes might be interested in this pic, too, taken last January when it hit lower than 20 degrees F. I filled one of those CO2 catridges you use for making seltzer with tap water and clamped it outside in the cold just to see if the expanding ice inside it would rupture it --like freezing pipes in cold weather.
What happened was as the water started to expand as it got near the freezing point, some came out as liquid and formed a small blob or droplet on top of the CO2 container, then froze as it cooled further in the air. As the water continued to come out, it formed a column of ice and lifted the little blob up and up and up, with the original blob still attached. I later figured the curliness was due to the fact that a small flap was formed on the inside of the CO2 cartridge when the cartridge was pierced by the soda-making device and this asymmetry caused the curling,
The curley-cue was entirely self-supporting, as you can see by the shadow cast on the ringstand base below it. I've repeated this skyentifical 'sperimink a number of times, just 'cuz.
Terry, 230RN
ETA side view for unbelievers. (I'm sure you can repeat this highly skyentifikal 'sperimink in freezers down your way.)