Post by: kava boy on February 21, 2012, 03:16:58 PM
[attachment deleted by admin]
Post by: Pit808 on February 23, 2012, 10:15:01 PM
Then wore a stainless target barrel in a OD green houge stock and 14x scope
Now its a m1 carbine 10/22. Picked up a OEM blued barrel and sprayed the receiver black.
I like that it's a lot lighter now.
(http://i1096.photobucket.com/albums/g321/toyupload/th_photobucket-7787-1330070853539.jpg) (http://s1096.photobucket.com/albums/g321/toyupload/?action=view¤t=photobucket-7787-1330070853539.jpg)
Post by: Dblnaknak on February 23, 2012, 10:30:16 PM
(http://i89.photobucket.com/albums/k219/dblnaknak/1af4e682.jpg)
Post by: new guy on January 08, 2013, 01:54:30 PM
Post by: hnl.flyboy on January 08, 2013, 01:55:55 PM
Question for you bruddahs who are akamai with 10/22s...
I just received my 18" .920 Green Mountain Bull Barrel. CHEEEEEEEEEE-HOOOOOOOOOOO!!!
So what's the deal with barrel droop when installing replacement barrels?
Is this something that happens more regularly with the heavier bull barrels?
Can something be done to prevent this (aside from male ED medications??) or is this something that is just bound to happen over time due to the weight of the barrel?
Thanks!! :shaka:
1022 barrel droop? Pic?
Post by: new guy on January 08, 2013, 01:59:12 PM
Post by: Inspector on January 08, 2013, 02:15:45 PM
Oh sorry, I should have said that I don't have barrel droop, yet.......Wait 'til you hit 60!!!!! :rofl: :rofl: :rofl:
Post by: new guy on January 08, 2013, 02:34:15 PM
Post by: Inspector on January 08, 2013, 02:55:30 PM
Bruddah Inspector, I was waiting for one comment like that!! ;DI'm not as quick as I used to be! :geekdanc:
Actually surprised it took so long!!
Barrel droop should not be an issue if your barrel has a good tight fit with the receiver. Also, if you do not over tighten the v-block screws.
Post by: macsak on January 08, 2013, 02:56:43 PM
Barrel droop should not be an issue if your barrel has a good tight fit with the receiver. Also, if you do not over tighten the v-block screws.
[/quote]
Post by: Kingkeoni on January 08, 2013, 03:01:19 PM
Post by: Inspector on January 08, 2013, 03:01:52 PM
that's what she saidThere is no way to approach this subject without making comments! :rofl:
Maybe I should start a new subject titled: Does Your Barrel Droop? :rofl:
Post by: Inspector on January 08, 2013, 03:02:37 PM
Here's one of my 10/22'sLooks like your barrel is drooping! :rofl:
Post by: new guy on January 08, 2013, 03:19:34 PM
Post by: Inspector on January 08, 2013, 03:29:22 PM
All kidding aside this is what I am hoping SpeedTek and the good folks at X-Ring will be able to help me transform my 10/22 Takedown into:Very Nice!
(http://farm9.staticflickr.com/8488/8165660049_2f1e0867f9_c.jpg)
(http://farm9.staticflickr.com/8485/8165808814_4318dca871_c.jpg)
Just waiting on the nylon Hogue stock to come in...
Post by: Izanagi on January 08, 2013, 06:25:43 PM
Post by: Inspector on January 08, 2013, 06:28:49 PM
i don't own a 10/22 :(Don't feel bad. I didn't own one until just a few months ago. Now I am planning on at least one more if two more. :D
SA has them all the time for $229.95. :shaka:
Post by: new guy on January 08, 2013, 06:33:35 PM
Post by: bass monkey on January 08, 2013, 06:38:12 PM
Post by: new guy on January 08, 2013, 07:04:49 PM
Post by: Inspector on January 08, 2013, 07:42:03 PM
http://rugerforum.net/gun-gallery/56684-10-22-take-down.html (http://rugerforum.net/gun-gallery/56684-10-22-take-down.html)
I think it looks pretty nice!!! :thumbsup:
Post by: new guy on January 09, 2013, 10:43:30 AM
Post by: Inspector on January 09, 2013, 11:40:54 AM
Hahahahahahahahaha! That guy had plenty people fooled, yeah?!?That was pretty funny. The sticker looks good on the stock as well! :rofl:
He did a good job on mod'ing that wood stock himself!
I wonder if the wood stock is heavier than the synthetic, and if so, how much heavier it is... still real nice nice!
Just by holding it, I can tell that the bull barrel is going to add some additional weight to the 10/22 TD.
I would imagine that the Hogue Overmolded Nylon stock is heavier than the stock the 10/22 TD comes with, but not sure.
When all is said and done, I might actually end up with a 10/22 TD that is A LOT heavier than the original. :(
What I liked about what he did is that he used a regular wood stock to do it. It actually looks pretty simple. And the beauty of it all is it won't cost much to try and find out if one likes it or not.
Weight is relative to your ability to carry it as far and as often as you need. For me the take down will need to be as light as possible.
BTW, my friend purchased one and put a BSA Sweet 22 scope on it and that thing is a real shooter. Very accurate. I believe more so than a stock 10/22.
Post by: Inspector on January 12, 2013, 12:03:29 PM
Post by: JMB on January 13, 2013, 05:28:23 PM
Post by: JMB on January 13, 2013, 05:33:04 PM
Post by: mongoose on January 13, 2013, 06:25:47 PM
Recent plinking at kokohead(http://i1197.photobucket.com/albums/aa427/jmbruhn/1353998593.jpg)
Looks like a dead ringer for my wife's gun. :shaka:
Post by: new guy on January 14, 2013, 09:03:06 AM
Post by: Inspector on January 14, 2013, 12:29:50 PM
Nice rifle Inspector!! I was thinking about getting a promag archangel for one of my 10/22.Thanks JMB!!! For an inexpensive stock (Relatively speaking) it is a nice stock. I like the way it looks and it fits nice with the adjustable buttstock. I still have not had much of a chance to shoot it. I have only performed a basic sight in with it. I am looking forward to stretching it out a bit and seeing what it can do at distance. If you are looking for a good stock at a good price that looks kewl you will probably like this.
Post by: Inspector on January 14, 2013, 12:32:29 PM
Very nice, bruddah Inspector!! :thumbsup:Hey New Guy,
My Hogue stock came in this weekend, but I guess I have to wait until X-Ring reopens(?) in February. :(
I was looking at the Hogue stock for my 10/22 as well. Try call Brian at 368-5263 and see if he'll let you pick it up before February.
Post by: new guy on January 14, 2013, 04:12:00 PM
Post by: Inspector on January 14, 2013, 04:38:59 PM
Mahaloz, bruddah Inspector... I should have been more clear... so sorry, yeah?So where are the pictures? Gotta see the 10/22 in its new kine clothes! :thumbsup:
I meant to say my hogue nylon stock came in via USPS (called around and the LGSs only had the rubber kine!)
BTW, if you don't mind me asking, what did you do (if anything) to your 10/22? Extractor? Buffer Tube? Trigger group? Extended mag release? I like the charging handle, too!!
:shaka:
The barrel, buffer, charging handle, and extended mag release is Kidd Innovations. The trigger is the Kidd trigger job trigger which fits into the existing Ruger plastic trigger enclosure. Its about half the price of their trigger group. The bolt, extractor, etc. and receiver are al stock Ruger.
Post by: new guy on January 14, 2013, 05:54:52 PM
Post by: Inspector on January 14, 2013, 07:23:51 PM
Whoa... Kidd accessories AND barrel? I'm all shame now with my crappy Green Mountain barrel!! :oops:Not sure why you have to mod the receiver for a GM barrel to fit? I thought they were drop in replacements?
Sadly, I won't be able to post many pics until I can get some assistance with cutting and modding the stock, and modifying the 10/22 TD receiver and GM barrel to fit.
Will keep everyone posted, but in the meantime I'm just glad to have a 10/22... Prices on .22 ammo makes things waaaaaaaaay easier to deal with!!
Now to get a semi or revolver in .22lr... Any suggestions?? :D
For a .22 semi or revolver my first question is plinking or serious target shooting?
If plinking I would recommend for a semi the new Ruger or any of the Ruger line with slim barrels, Browning w/slim barrel, Walther. For a revolver I would go with a Smith and Wesson 617 (Also can be used for serious target shooting), Ruger Single 6, Taurus. For serious target I would consider Ruger w/Bull Barrel, Browning w/Bull Barrel, and Smith and Wesson semis. Not sure of too many serious target revolvers any more except maybe the S&W 617 mentioned above. I am probably not remembering a few.
Post by: new guy on January 15, 2013, 09:13:55 AM
Post by: stangzilla on January 20, 2013, 10:59:13 PM
nothing special so far. but I really like it. >:D
(http://farm9.staticflickr.com/8075/8401713056_6fc4dd4966_c.jpg) (http://www.flickr.com/photos/70099529@N03/8401713056/)
already got a few mags and had a couple other parts lying around.
(http://farm9.staticflickr.com/8084/8400623181_1c7552f40f_c.jpg) (http://www.flickr.com/photos/70099529@N03/8400623181/)
(http://farm9.staticflickr.com/8466/8401713622_e43f07490b_c.jpg) (http://www.flickr.com/photos/70099529@N03/8401713622/)
Post by: Inspector on January 21, 2013, 09:31:03 AM
Finally got my carbine 2 days ago.Looks too much like an assault rifle. Give it to me so you don't get caught with it! :rofl: :rofl: :rofl:
nothing special so far. but I really like it. >:D
(http://farm9.staticflickr.com/8075/8401713056_6fc4dd4966_c.jpg) (http://www.flickr.com/photos/70099529@N03/8401713056/)
already got a few mags and had a couple other parts lying around.
(http://farm9.staticflickr.com/8084/8400623181_1c7552f40f_c.jpg) (http://www.flickr.com/photos/70099529@N03/8400623181/)
(http://farm9.staticflickr.com/8466/8401713622_e43f07490b_c.jpg) (http://www.flickr.com/photos/70099529@N03/8401713622/)
The 25 round mags are pretty kewl looking on a stock 10/22.
Post by: Kingkeoni on January 21, 2013, 09:37:37 AM
:rofl:
Post by: Jl808 on January 21, 2013, 10:51:09 AM
Finally got my carbine 2 days ago.
nothing special so far. but I really like it. >:D
(http://farm9.staticflickr.com/8075/8401713056_6fc4dd4966_c.jpg) (http://www.flickr.com/photos/70099529@N03/8401713056/)
already got a few mags and had a couple other parts lying around.
(http://farm9.staticflickr.com/8084/8400623181_1c7552f40f_c.jpg) (http://www.flickr.com/photos/70099529@N03/8400623181/)
(http://farm9.staticflickr.com/8466/8401713622_e43f07490b_c.jpg) (http://www.flickr.com/photos/70099529@N03/8401713622/)
Hi stangzilla. What optics are those?
Post by: mechtechhi on January 21, 2013, 02:21:50 PM
Post by: new guy on January 21, 2013, 03:26:03 PM
Post by: mechtechhi on January 21, 2013, 05:18:27 PM
Post by: stangzilla on January 22, 2013, 08:18:25 AM
Hi stangzilla. What optics are those?
they are centerpoint scope and BSA red dot.
not the best, but they were cheap.
Shown with $1000 worth of ammo.
:rofl:
almost. ;D
Post by: mechtechhi on January 22, 2013, 08:14:19 PM
Post by: Dolomite on January 22, 2013, 10:09:59 PM
Post by: Inspector on January 22, 2013, 10:39:31 PM
Post by: JMB on January 23, 2013, 08:36:02 PM
Post by: hnl.flyboy on January 23, 2013, 09:25:57 PM
Got my Archangel Target stock...Kudos Inspector!!(http://i1197.photobucket.com/albums/aa427/jmbruhn/1359008978.jpg)
Damn, that looks so nice. I want that for my 10/22 :(
Post by: Inspector on January 23, 2013, 09:29:45 PM
Got my Archangel Target stock...Kudos Inspector!!(http://i1197.photobucket.com/albums/aa427/jmbruhn/1359008978.jpg)Looks Awsome!!! What barrel is that you have?
Post by: JMB on January 23, 2013, 10:14:56 PM
Post by: Dolomite on January 23, 2013, 10:22:05 PM
Thanks for the gun porn....
Post by: rb96706 on January 30, 2013, 04:52:46 AM
(http://i250.photobucket.com/albums/gg274/rb96706/Gun%20collection/image_zpscc958deb.jpg)
Post by: stangzilla on January 30, 2013, 08:46:40 AM
please excuse the poor lighting. i need to work on my indoor photo skills.
(http://farm9.staticflickr.com/8329/8430644890_fab023f04c_c.jpg) (http://www.flickr.com/photos/70099529@N03/8430644890/)
Post by: Inspector on January 30, 2013, 11:22:40 AM
Post by: aieahound on January 30, 2013, 12:29:57 PM
IMO the Must change parts on a new 10/22:
1. - Auto bolt release.
2. - charging handle.
Post by: Dogadobo on January 30, 2013, 10:55:02 PM
Post by: hnl.flyboy on January 31, 2013, 11:12:57 AM
Here is my 10-22...
Damn, that's sexy!
Post by: Inspector on January 31, 2013, 11:28:41 AM
Here is my 10-22...WOW! Very nice. I like the turned bolt. Nice touch.
Post by: djsmiles808 on January 31, 2013, 11:52:24 AM
My sons 10/22.with arch angel stock.can this take reg bx25 mags? And how much was the stock?
(http://i250.photobucket.com/albums/gg274/rb96706/Gun%20collection/image_zpscc958deb.jpg)
Post by: Dolomite on January 31, 2013, 12:14:34 PM
Here is my 10-22...
Damn that is a nice gun, looks like my 308....
I'm wanting a 10/22 now.....
Keep up all the nice pics guys!!!!!
Post by: new guy on January 31, 2013, 12:46:27 PM
can this take reg bx25 mags? And how much was the stock?
Bruddah djsmiles808, not sure about compatibility with BX25 mags, but just in case you were interested, I'm pretty sure I saw this stock sitting on the middle counter at Windward Gun Shop just this past Sunday afternoon.
Sorry, but I didn't check to see how much it was...
Post by: rb96706 on January 31, 2013, 05:35:38 PM
Post by: bass monkey on February 01, 2013, 08:51:44 AM
looking for a stock one, or parts to piece one together
Post by: stangzilla on February 01, 2013, 09:30:28 AM
Those last two 10/22's are GREAT!!! The best part is they are fun to shoot! :thumbsup:
and fun to modify.
its much like modifying Mustangs.
you start with something cheap, modify with tons of aftermarket parts,
until you spend 5 times more on parts than the original gun is worth. ;D
but its a fun journey.
Post by: Inspector on February 01, 2013, 09:44:51 AM
anyone got a 10/22 for sale?I tried to advertise a couple of times. Mostly I got no response or someone trying to sell me one for more than you can get one at SA for ($229). Good luck tho. If you really don't mind spending the bucks you can buy each part separately. Check out tactical solutions website. You can buy new receivers, bolts, etc.
looking for a stock one, or parts to piece one together
Post by: Inspector on February 01, 2013, 09:46:47 AM
and fun to modify.True dat!!!
its much like modifying Mustangs.
you start with something cheap, modify with tons of aftermarket parts,
until you spend 5 times more on parts than the original gun is worth. ;D
but its a fun journey.
Post by: bass monkey on February 01, 2013, 09:47:51 AM
thanks for the heads up, think ill just grab a new one when my paycheck comes in.
Post by: gmau on February 01, 2013, 12:29:24 PM
thanks bro. yeah i know you had some parts listed, so was just tryna see if anyone had the remaining parts, then i just remembered you were looking for parts before too.
thanks for the heads up, think ill just grab a new one when my paycheck comes in.
I have a practically new wood stock with barrel band and blued barrel that I'd sell if interested. I shot less than 100 rounds through the rifle in stock configuration. Never used the barrel or stock after that. $70 for both?
I got the rifle from SA and then pretty much just used the receiver.
Post by: Dolomite on February 01, 2013, 03:39:43 PM
Post by: hnl.flyboy on February 01, 2013, 03:52:35 PM
Anyplace just sell the 10/22 receiver?
Not a Ruger receiver. You'll have to get something such as Volquartsen, Tactical Solutions, MOA Corp., or Tactical Machining.
ALUMINUM:
Volquartsen SuperLite
http://www.brownells.com/rifle-parts/receiver-amp-action-parts/receivers/one-piece-receivers/10-22-superlite-receiver-prod13855.aspx?ttver=2 (http://www.brownells.com/rifle-parts/receiver-amp-action-parts/receivers/one-piece-receivers/10-22-superlite-receiver-prod13855.aspx?ttver=2)
Tactical Machining
http://www.brownells.com/rifle-parts/receiver-amp-action-parts/receivers/one-piece-receivers/10-22-receiver-prod54737.aspx?ttver=2 (http://www.brownells.com/rifle-parts/receiver-amp-action-parts/receivers/one-piece-receivers/10-22-receiver-prod54737.aspx?ttver=2)
Tactical Solutions X-Ring Custom
http://www.tacticalsol.com/tshome/x-ring-custom-22lr-receiver (http://www.tacticalsol.com/tshome/x-ring-custom-22lr-receiver)
Stainless Steel:
Volquartsen
http://www.brownells.com/rifle-parts/receiver-amp-action-parts/receivers/one-piece-receivers/stainless-steel-22lr-receiver-prod13848.aspx?ttver=2 (http://www.brownells.com/rifle-parts/receiver-amp-action-parts/receivers/one-piece-receivers/stainless-steel-22lr-receiver-prod13848.aspx?ttver=2)
MOA Corp.
http://www.brownells.com/rifle-parts/receiver-amp-action-parts/receivers/one-piece-receivers/stainless-steel-10-22-receiver-prod13793.aspx?ttver=2 (http://www.brownells.com/rifle-parts/receiver-amp-action-parts/receivers/one-piece-receivers/stainless-steel-10-22-receiver-prod13793.aspx?ttver=2)
Post by: bass monkey on February 01, 2013, 04:01:03 PM
I have a practically new wood stock with barrel band and blued barrel that I'd sell if interested. I shot less than 100 rounds through the rifle in stock configuration. Never used the barrel or stock after that. $70 for both?
I got the rifle from SA and then pretty much just used the receiver.
thanks bro was mostly looking for a receiver though. lots of other people seem to be selling all the other parts except for the receiver
edit.
just saw the links flyboy posted up. damn the receivers are expensive and all companies seem to be out of stock and no back ordering. i think im better off just buying a 10/22, keeping it stock and just shooting it. thats all i really wanted it for anyways.
Post by: gmau on February 01, 2013, 10:05:22 PM
thanks bro was mostly looking for a receiver though. lots of other people seem to be selling all the other parts except for the receiver
edit.
just saw the links flyboy posted up. damn the receivers are expensive and all companies seem to be out of stock and no back ordering. i think im better off just buying a 10/22, keeping it stock and just shooting it. thats all i really wanted it for anyways.
You could also check places like gunbroker for the receiver. I've seen them for less than $100 there but you do have to ship it to an FFL of course. Daniel at Kaneohe Gun Shop is probably the best deal for cheap transfers as he usually charges a % or less than $20 for cheap stuff like that.
Post by: bass monkey on February 02, 2013, 09:43:04 AM
Post by: Inspector on February 02, 2013, 09:51:42 AM
Anyplace just sell the 10/22 receiver?This place has the best price for the buck: http://www.tacticalmachining.com/10-22-receiver.html (http://www.tacticalmachining.com/10-22-receiver.html)
Only problem is that, like most places right now, they are out of stock. Also, by the time you also buy a bolt and extractor/firing pin parts for it you may be able to buy a complete 10/22 cheaper. But, with that said, if you are looking to build the ultimate tack driver. One that will put just about any match rifle to shame then you want a machined receiver and bolt plus all the other goodies.
Post by: Bigkahuna808 on February 02, 2013, 09:55:15 AM
Post by: bass monkey on February 02, 2013, 09:58:18 AM
This place has the best price for the buck: http://www.tacticalmachining.com/10-22-receiver.html (http://www.tacticalmachining.com/10-22-receiver.html)
Only problem is that, like most places right now, they are out of stock. Also, by the time you also buy a bolt and extractor/firing pin parts for it you may be able to buy a complete 10/22 cheaper. But, with that said, if you are looking to build the ultimate tack driver. One that will put just about any match rifle to shame then you want a machined receiver and bolt plus all the other goodies.
thats true. all this time i thought i was looking for a reciever. then i looked through the links flyboy posted, and was like, these are incomlete, i gotta buy the other parts. then i seen complete ones for sale, and the price, and i was like, im just gonna buy a stock one. not looking for a crazy custom build or anything.
thanks for all the help and links and whatnot.
Post by: rb96706 on February 02, 2013, 01:21:38 PM
(http://i250.photobucket.com/albums/gg274/rb96706/Gun%20collection/20130202_090420_zps100ee38f.jpg)
Post by: djsmiles808 on February 02, 2013, 05:55:22 PM
10/22 arch angel stock with bx25 magdamn didn't notice you at the range. got there at 130. shoulda checked my phone and checked it out! looks purdy!
(http://i250.photobucket.com/albums/gg274/rb96706/Gun%20collection/20130202_090420_zps100ee38f.jpg)
Post by: Teichi on February 03, 2013, 04:52:45 PM
Post by: stangzilla on February 03, 2013, 05:30:23 PM
I saw this at Koko Head today. It is a dress-up kit with dummy 5.56mm NATO belt. The magazine is stock 10/22 and hidden under all the cosmetics.
pretty cool.
Post by: stangzilla on February 03, 2013, 05:35:02 PM
(http://farm9.staticflickr.com/8224/8439218413_f9a5804405_c.jpg) (http://www.flickr.com/photos/70099529@N03/8439218413/)
(http://farm9.staticflickr.com/8082/8440309180_897f41b632_c.jpg) (http://www.flickr.com/photos/70099529@N03/8440309180/)
Post by: Inspector on February 03, 2013, 05:39:47 PM
Post by: stangzilla on February 03, 2013, 07:03:48 PM
That is pretty kewl! But I would be afraid someone would call big brother on me for having a fully auto weapon! LOL!!!
thats next. >:D
Post by: BananaClip on February 03, 2013, 11:49:16 PM
I saw this at Koko Head today. It is a dress-up kit with dummy 5.56mm NATO belt. The magazine is stock 10/22 and hidden under all the cosmetics.Yeah, that's pretty AWESOME... Theres a guy that rigs 10/22's into every airsoft stock he can get his hands on......
He has some YouTube vids of him shooting all his CRAZY 10/22's at a range in the mainland somewhere.....
Post by: fstbckgt on March 27, 2013, 01:28:29 AM
anyone got a 10/22 for sale?
looking for a stock one, or parts to piece one together
Still Looking?
Post by: chad30 on March 28, 2013, 06:12:01 PM
Post by: BananaClip on March 28, 2013, 06:15:37 PM
10-22's are da shiznat!Eh, what kinda mag is that? I like it! :thumbsup:
I'm serious, what is that..... :shake: I need one.... :shake:
Looks like those Puma PPS's........ ???
Post by: chad30 on March 28, 2013, 06:18:23 PM
Post by: BananaClip on March 28, 2013, 06:20:15 PM
It's the archangel mag, I dig it, has more of an AR American style curve vs most AK looking heavy curved 10-22 mags...Oh ok.... Yeah I like that MP5 curve......not too much...just right.... :thumbsup:
Post by: chad30 on March 28, 2013, 06:23:49 PM
Post by: keliishaine on March 28, 2013, 07:11:05 PM
Post by: chad30 on April 04, 2013, 12:23:51 AM
Anyone tried those hc3r mags yet?? They look awesome, the thumb assist and that removable clip seems so convenient.
Post by: djsmiles808 on April 13, 2013, 11:01:22 PM
new scope and bipodhow is that bipod holding up? looking to get one for my 22
(http://farm9.staticflickr.com/8224/8439218413_f9a5804405_c.jpg) (http://www.flickr.com/photos/70099529@N03/8439218413/)
(http://farm9.staticflickr.com/8082/8440309180_897f41b632_c.jpg) (http://www.flickr.com/photos/70099529@N03/8440309180/)
Post by: stangzilla on April 14, 2013, 05:07:08 PM
how is that bipod holding up? looking to get one for my 22
Haven't shot it yet with the bipod.
I will post how it goes in a couple weeks most likely.
Post by: Hunter1007 on April 14, 2013, 05:13:09 PM
Post by: numbertwo on April 16, 2013, 09:28:03 PM
Picked up a BX-25x2 mag at OGC the other day. 50rds, pretty badass. Not too sure if they have anymore in stock but great addition to any 10/22.
What the hell? Everytime I go there they never have anything specifically for the 10/22.
Post by: GreenStomper on April 16, 2013, 10:23:32 PM
Post by: submariner on April 19, 2013, 05:29:33 PM
Post by: Inspector on April 19, 2013, 06:07:16 PM
Just got in my new barrel and stock. Now just need to get to the range and see what she'll do. :DThat thing is awful purdy!!!! :thumbsup: :thumbsup: :thumbsup:
What barrel and mods did you put on it? What stock is that?
Post by: submariner on April 19, 2013, 07:08:18 PM
Post by: Inspector on April 19, 2013, 07:24:49 PM
Thanks I hope it shoots as good as it looks. I put the green mountain 18in fluted bull barrel on it and the stock is the yukon extreme. I ordered it all last week and it just came in. I can't wait to get out to the range. :shake:GM Barrels are great so it should shoot as good as it looks! You just need to find the right ammo it likes. Did you modify anything else like the trigger/bolt/handle/mag release?
I just finished a new 10/22 build. I don't want to show it off yet cuz I am still waiting for the rings to show up. I can't wait to get it out to the range to see how it will do.
Post by: submariner on April 19, 2013, 07:46:43 PM
Post by: Inspector on May 05, 2013, 03:53:01 PM
Going to install some sling mounts and try practice standing.
It didn't group like I wanted with the CCI Blazer I brought with me. Still able to hit plastic easter eggs blowing around in the breeze at 100yds. Going to try some better ammo in it next time.
Post by: wirecounter on May 05, 2013, 08:15:41 PM
Post by: new guy on May 06, 2013, 11:48:18 AM
Post by: dirtylickins on May 06, 2013, 05:21:48 PM
Post by: chad30 on May 11, 2013, 10:38:05 AM
Post by: chad30 on May 11, 2013, 10:42:33 AM
Post by: fstbckgt on May 11, 2013, 10:56:50 AM
Finger nail polish mod lolIf it doesn't last grab a bottle of Testors model paint, long lasting enamel.
Post by: SpeedTek on May 11, 2013, 10:58:44 AM
So what do you think, bruddah SpeedTek... can or no can??
Doing 2 right now!
I know this is old but finally got around to doing some.
Installing New recievers with picatinny rail built in. and Aluminum Barrels with SS insert
Post by: chad30 on May 11, 2013, 03:22:23 PM
Post by: fstbckgt on May 11, 2013, 11:29:37 PM
Thanks for the tip Fstbckgt! I never thought of that. The excess will come right off with a cleaner not strong enough to ruin the receiver coating?I just used a toothpick to apply, makes it real easy to not f*** up. But yes paint thinner worked fine when I switched my ar from red to green. Its also nice since eBay has tons of colors for a few bucks a bottle.
Post by: new guy on May 14, 2013, 04:37:21 PM
Post by: djsmiles808 on May 14, 2013, 04:40:11 PM
Post by: SpeedTek on May 15, 2013, 12:52:11 AM
Post by: Inspector on May 15, 2013, 12:56:01 AM
Post by: aieahound on May 15, 2013, 11:25:06 AM
That's bad ass ! :thumbsup:
Post by: SpeedTek on May 15, 2013, 12:52:01 PM
My next project... as soon as it is finally released, that is!
(http://www.hightowerarmory.com/v/vspfiles/assets/images/hta%20main%209.jpg)
I have built these. You need to extend the barrel so its 28" overall. I have them available using airsoft donors.
Post by: djsmiles808 on May 22, 2013, 07:37:11 AM
Finished Phase 1hows the fitment? been reading some fitment issues on the receiver end.
Post by: SpeedTek on May 22, 2013, 08:01:55 AM
hows the fitment? been reading some fitment issues on the receiver end.
On what part?
Post by: SpeedTek on July 22, 2013, 08:11:33 PM
I got it because it was shooting all over the place. (Bipod mounted on Barrel)
He wanted to throw it out or put for sale on 2aHawaii. So I told him to let me borrow it.
Took it out to the range the way it was to see how it was. 4" grouping at 100 Yards was Awesome!
Especially with a 4-16x BSA Sweet 22 Scope. Trigger was an awesome match 7lbs!
Went home with all this data in mind.
Tore it apart and...
1. Trigger Job 3lbs
2. Auto-Bolt Release
3. Polished Bolt, Firing Pin
4. Move the Bipod back
5. Added Picatinny Mount for Scope and 1-Piece Scope Mount
6. Modified Butler Creek Folding Stock
Took it out to the range.
Me shooting on a Windy day (7/21) 1" grouping
Also Standing
The other target was mutilated by Dirsh who goes nuts when you tell him shoot all you want.
Ammo was Federal Blazer 22LR Black and Silver Box.
Now the big question is should I give it back?
Post by: Inspector on July 22, 2013, 08:19:56 PM
To me! LOL!!!!!!
Post by: macsak on July 22, 2013, 08:25:58 PM
i'm sure the owner (xxxxxxxxxxxxxxxx), whoever he/she is
will love it
if not, i'll sacrifice and take it off your hands
Here is a someones Ruger 10/22 Takedown. I won't mention his name. (xxxxxxxxxxxxxxxxxxx)
I got it because it was shooting all over the place. (Bipod mounted on Barrel)
He wanted to throw it out or put for sale on 2aHawaii. So I told him to let me borrow it.
Took it out to the range the way it was to see how it was. 4" grouping at 100 Yards was Awesome!
Especially with a 4-16x BSA Sweet 22 Scope. Trigger was an awesome match 7lbs!
Went home with all this data in mind.
Tore it apart and...
1. Trigger Job 3lbs
2. Auto-Bolt Release
3. Polished Bolt, Firing Pin
4. Move the Bipod back
5. Added Picatinny Mount for Scope and 1-Piece Scope Mount
6. Modified Butler Creek Folding Stock
Took it out to the range.
Me shooting on a Windy day (7/21) 1" grouping
Also Standing
The other target was mutilated by Dirsh who goes nuts when you tell him shoot all you want.
Ammo was Federal Blazer 22LR Black and Silver Box.
Now the big question is should I give it back?
Post by: dirtylickins on July 22, 2013, 09:12:49 PM
Post by: Inspector on July 22, 2013, 09:20:20 PM
What THE HELL IS GOING ON HERE? :grrr:Don't concern yourself with this. It doesn't involve you. The gun belongs to somebody named "DirtyChicken". :geekdanc:
Post by: bighoks on July 22, 2013, 10:22:09 PM
(http://i843.photobucket.com/albums/zz354/daincrediblehoks/2013-07-09_20-38-44_HDR_zpsbb4a074e.jpeg)
Post by: ACADEMI on July 22, 2013, 10:30:11 PM
Post by: dirtylickins on July 23, 2013, 01:18:38 AM
Don't concern yourself with this. It doesn't involve you. The gun belongs to somebody named "DirtyChicken". :geekdanc::rofl: :rofl: :rofl: :grrr: ........ p.s nice betsy hoks wish i had one :(
Post by: dirsh on July 23, 2013, 10:48:23 AM
(http://i7.photobucket.com/albums/y254/dirsh/gun/IMG_1263Small_zps2ccd42ce.jpg) (http://s7.photobucket.com/user/dirsh/media/gun/IMG_1263Small_zps2ccd42ce.jpg.html)
(http://i7.photobucket.com/albums/y254/dirsh/gun/IMG_1260Small_zpsaa049dfb.jpg) (http://s7.photobucket.com/user/dirsh/media/gun/IMG_1260Small_zpsaa049dfb.jpg.html)
Post by: macsak on July 23, 2013, 11:02:29 AM
how much?
how long did it take do complete the project?
custom work done by speedtek
(http://i7.photobucket.com/albums/y254/dirsh/gun/IMG_1263Small_zps2ccd42ce.jpg) (http://s7.photobucket.com/user/dirsh/media/gun/IMG_1263Small_zps2ccd42ce.jpg.html)
(http://i7.photobucket.com/albums/y254/dirsh/gun/IMG_1260Small_zpsaa049dfb.jpg) (http://s7.photobucket.com/user/dirsh/media/gun/IMG_1260Small_zpsaa049dfb.jpg.html)
Post by: dirsh on July 23, 2013, 11:14:45 AM
Post by: macsak on July 23, 2013, 11:34:30 AM
mind if i steal the idea?
took like a month. on a payment plan
Post by: SpeedTek on July 23, 2013, 12:01:10 PM
still worth it, though
mind if i steal the idea?
I got a whole sheet. Youre welcome to them.
Post by: dirsh on July 23, 2013, 01:34:28 PM
Post by: SpeedTek on July 23, 2013, 04:46:38 PM
Post by: dirsh on July 23, 2013, 05:12:08 PM
Post by: Bunker on July 23, 2013, 05:40:03 PM
Maybe i should use the kitty as my seal of approval.......Seems to work for some real well....
(http://i1287.photobucket.com/albums/a632/Bunker9939/pink_gun_bikini_gun-14_zps72dfdf8d.jpg) (http://s1287.photobucket.com/user/Bunker9939/media/pink_gun_bikini_gun-14_zps72dfdf8d.jpg.html)
(http://i1287.photobucket.com/albums/a632/Bunker9939/hellokitty_ar15assault_2_zpsf0a2a8a0.jpg) (http://s1287.photobucket.com/user/Bunker9939/media/hellokitty_ar15assault_2_zpsf0a2a8a0.jpg.html)
(http://i1287.photobucket.com/albums/a632/Bunker9939/248243_zps9ce2d885.jpg) (http://s1287.photobucket.com/user/Bunker9939/media/248243_zps9ce2d885.jpg.html)
Post by: keoni008 on July 27, 2013, 08:40:33 AM
Boyd stock painted BMW blue
VQ Heavy match bull barrel
VQ match 2.5lb trigger
VQ bolt buffer
Auto bolt release with billet handle
Polished bolt and slide
Leupold 4.5X14X40 with a 3" sunshade ( Kinda over kill )
Post by: bighoks on July 29, 2013, 08:49:46 PM
:rofl: :rofl: :rofl: :grrr: ........ p.s nice betsy hoks wish i had one :(Thanks bro..... you should build you one and come shoot it one weekend
Post by: michalebsdad on July 29, 2013, 09:02:51 PM
Here's mine:
Boyd stock painted BMW blue
VQ Heavy match bull barrel
VQ match 2.5lb trigger
VQ bolt buffer
Auto bolt release with billet handle
Polished bolt and slide
Leupold 4.5X14X40 with a 3" sunshade ( Kinda over kill )
You think??? Nice gun brother...for a .22! :rofl: :rofl:
Post by: keoni008 on July 29, 2013, 09:41:32 PM
You think??? Nice gun brother...for a .22! :rofl: :rofl:LMAO! So u can see the bullet enter whatever it hits!
Post by: SpeedTek on July 30, 2013, 08:01:19 PM
Customer brought in his New Ruger TD
He told me:
Make it more compact
Don't make it heavier
Make the trigger better
Put on some good optics
Do what you want! As if it was yours!
I said uh OK....
Install Folding Stock
Titanium Screws and Pins
Picatinny Scope Rail
ACOG 4x
Extended Trigger Release
2.5 lbs trigger
Auto Bolt Release
Carbon Fiber Buffer Pin
Polished Bolt, Firing Pin
Shorten and Pinned Flash Hider on Barrel 16.25" overall
Long Steel Flash Hider
Hope this fits his wishes! (no its not dirtychickens!!!)
Post by: searider9duece on July 30, 2013, 08:12:29 PM
Another reason not to leave your Ruger TD at X-Ring!!!
Customer brought in his New Ruger TD
He told me:
Make it more compact
Don't make it heavier
Make the trigger better
Put on some good optics
Do what you want! As if it was
I said uh OK....
Install Folding Stock
Titanium Screws and Pins
Picatinny Scope Rail
ACOG 4x
Extended Trigger Release
2.5 lbs trigger
Auto Bolt Release
Carbon Fiber Buffer Pin
Polished Bolt, Firing Pin
Shorten and Pinned Flash Hider on Barrel 16.25" overall
Long Steel Flash Hider
Hope this fits his wishes! (no its not dirtychickens!!!)
About how much $ for a job like that Dex?
Post by: SpeedTek on July 30, 2013, 08:27:40 PM
Post by: michalebsdad on July 30, 2013, 09:05:48 PM
Post by: SpeedTek on July 30, 2013, 09:08:19 PM
That is now one expensive .22...can't wait to see the pictures when your done!
its done.....! The shorter barrel is crazy!
Post by: michalebsdad on July 30, 2013, 09:23:51 PM
Post by: Bigkahuna808 on July 30, 2013, 09:36:00 PM
Post by: SpeedTek on July 30, 2013, 10:23:29 PM
Post by: dirtylickins on July 31, 2013, 07:14:59 PM
Post by: irishd on August 21, 2013, 07:11:51 PM
(http://i814.photobucket.com/albums/zz69/djbryant501/8b15f02f-6740-4e14-95af-220dc2b501d3_zpsbe1de9d7.jpg) (http://s814.photobucket.com/user/djbryant501/media/8b15f02f-6740-4e14-95af-220dc2b501d3_zpsbe1de9d7.jpg.html)
(http://i814.photobucket.com/albums/zz69/djbryant501/983bb61b-cfe9-46aa-aa1d-0dae5908046a_zps4ce44f64.jpg) (http://s814.photobucket.com/user/djbryant501/media/983bb61b-cfe9-46aa-aa1d-0dae5908046a_zps4ce44f64.jpg.html)
Post by: Bigkahuna808 on August 21, 2013, 07:26:12 PM
Post by: 808gmac on August 21, 2013, 08:06:14 PM
i don't own a 10/22 :(
You should get one...they' are cheap, rugged, lots of accessories, and fun plinker
Post by: hepcat96821 on August 21, 2013, 11:14:46 PM
Post by: SpeedTek on August 22, 2013, 07:35:31 AM
Post by: SpeedTek on August 22, 2013, 07:47:32 AM
About how much $ for a job like that Dex?
Install Folding Stock $99
Titanium Screws and Pins $30
Picatinny Scope Rail $10
ACOG 4x $550 Used
Extended Mag Release $40
2.5 lbs trigger $75
Auto Bolt Release (included in $75)
Carbon Fiber Buffer Pin (included in $75)
Polished Bolt, Firing Pin (included in $75)
Shorten and Pinned Flash Hider on Barrel 16.25" overall (plus remounted sight and 11d target crown) $75
Long Steel Flash Hider $15
$365 without the ACOG
Post by: irishd on August 22, 2013, 10:19:17 AM
Nice! What's the details? Looks like a boyds stock, power custom bolt and can't place the triggger
Yes, that's a Boyd's stock (ordered direct from them), Green Mountain 18" Stainless Fluted Bbl., Bolt is from KIDD, and trigger group is from "Hornet Customs" (2 1/2 pounds)
Post by: bighoks on August 22, 2013, 12:03:24 PM
Just finished building this.... :shaka:Looks like we can hit the range now and have a little shootoff......lol
(http://i814.photobucket.com/albums/zz69/djbryant501/8b15f02f-6740-4e14-95af-220dc2b501d3_zpsbe1de9d7.jpg) (http://s814.photobucket.com/user/djbryant501/media/8b15f02f-6740-4e14-95af-220dc2b501d3_zpsbe1de9d7.jpg.html)
(http://i814.photobucket.com/albums/zz69/djbryant501/983bb61b-cfe9-46aa-aa1d-0dae5908046a_zps4ce44f64.jpg) (http://s814.photobucket.com/user/djbryant501/media/983bb61b-cfe9-46aa-aa1d-0dae5908046a_zps4ce44f64.jpg.html)
Post by: sound wave on August 22, 2013, 05:31:10 PM
This is my first 10-22. This is what I have done so far:
AGP folding takedown stock with 1" butt pad
Kidd bolt
Kidd charging handle (I would like the handle a little bit longer so I ordered a JWH extended charging handle to replace it)
Kidd bolt buffer
Kidd single stage drop-in aluminum trigger unit with auto bolt release. Currently set at 4 lbs (It is adjustable down to 1.5 lbs with the turn of a screw, but it seems perfect right now)
Kidd speed magazine release lever
Game Reaper scope mount
Nikon P-22 2-7x scope
Pro-mag tactical barrel band
Harris bipod on Larue mount (borrowed from my AR)
Don't ask me how much I got in this rifle, because I am afraid to calculate it. :shake:
Post by: stangzilla on August 22, 2013, 05:32:34 PM
(http://i116.photobucket.com/albums/o8/sound_wavez/photo_zps3c1d072f.jpg) (http://s116.photobucket.com/user/sound_wavez/media/photo_zps3c1d072f.jpg.html)
This is my first 10-22. This is what I have done so far:
AGP folding takedown stock with 1" butt pad
Kidd bolt
Kidd charging handle (I would like the handle a little bit longer so I ordered a JWH extended charging handle to replace it)
Kidd bolt buffer
Kidd single stage drop-in aluminum trigger unit with auto bolt release. Currently set at 4 lbs (It is adjustable down to 1.5 lbs with the turn of a screw, but it seems perfect right now)
Kidd speed magazine release lever
Game Reaper scope mount
Nikon P-22 2-7x scope
Pro-mag tactical barrel band
Harris bipod on Larue mount (borrowed from my AR)
Don't ask me how much I got in this rifle, because I am afraid to calculate it. :shake:
very nice! :shaka:
Post by: macsak on August 22, 2013, 05:38:10 PM
how much you got in that rifle?
http://2ahawaii.com/Smileys/extended/evil.gif (http://2ahawaii.com/Smileys/extended/evil.gif)
(http://i116.photobucket.com/albums/o8/sound_wavez/photo_zps3c1d072f.jpg) (http://s116.photobucket.com/user/sound_wavez/media/photo_zps3c1d072f.jpg.html)
This is my first 10-22. This is what I have done so far:
AGP folding takedown stock with 1" butt pad
Kidd bolt
Kidd charging handle (I would like the handle a little bit longer so I ordered a JWH extended charging handle to replace it)
Kidd bolt buffer
Kidd single stage drop-in aluminum trigger unit with auto bolt release. Currently set at 4 lbs (It is adjustable down to 1.5 lbs with the turn of a screw, but it seems perfect right now)
Kidd speed magazine release lever
Game Reaper scope mount
Nikon P-22 2-7x scope
Pro-mag tactical barrel band
Harris bipod on Larue mount (borrowed from my AR)
Don't ask me how much I got in this rifle, because I am afraid to calculate it. :shake:
Post by: Bigkahuna808 on August 22, 2013, 05:43:03 PM
Post by: stangzilla on August 22, 2013, 05:48:47 PM
Hey stangzilla might as well buy a barrel already you invested in kidd stuff alread. Whats another few hundred for a kidd barre. Some how a 10/22 build can cost more than a ar15 or a remington 700...nice build
thats not my 10/22, its Sound Wave's. he only gets the best parts.
i built mine with cheapo stuff. ;)
Post by: sound wave on August 22, 2013, 06:24:33 PM
bigkahuna, afaik there is no aftermarket takedown barrel yet.... is there?
I do plan on changing out the barrel when they become available though.
In the meantime, fortunately for my wallet, I have temporarily run out of things to do to it.
Post by: Bigkahuna808 on August 22, 2013, 06:40:45 PM
thanks guys! :shaka:
bigkahuna, afaik there is no aftermarket takedown barrel yet.... is there?
I do plan on changing out the barrel when they become available though.
In the meantime, fortunately for my wallet, I have temporarily run out of things to do to it.
Yeah I only realized it was a takedown after I posted. My bad..I was looking at that stock setup but was wondering how well it will match the stock forearm. Where did u get the stock from? Care to share how much?
We need more people to pester tony kidd to make a barrel.
Post by: SpeedTek on August 22, 2013, 06:42:53 PM
thanks guys! :shaka:
bigkahuna, afaik there is no aftermarket takedown barrel yet.... is there?
I do plan on changing out the barrel when they become available though.
In the meantime, fortunately for my wallet, I have temporarily run out of things to do to it.
barrel can be made....its 2 cuts on a mill
I am making one with a TS Aluminum bull barrel for the TD right now. Hopefully be ready at the gun show.
Post by: sound wave on August 22, 2013, 07:08:45 PM
I was looking at that stock setup but was wondering how well it will match the stock forearm. Where did u get the stock from? Care to share how much?
I got the stock from AGP's website. With the 1" buttpad, it costed $111 before shipping. http://www.agparms.com/agp-folding-stock-for-ruger-10-22-takedown/ (http://www.agparms.com/agp-folding-stock-for-ruger-10-22-takedown/)
As far as how well it matches up, the AGP stock is blockier than the Ruger forearm, but it isn't really all that drastic a difference. Also, the Ruger part has the checkering whereas the AGP doesn't have any. The finish is a similar shade, but the finish is smoother on the forearm, where the AGP feels a bit more textured. Also, you can see circles in the finish at various areas on the AGP stock... where they poured the plastic into the mold? IDK.
you can see the circles I am talking about:
(http://i116.photobucket.com/albums/o8/sound_wavez/photo_zps19d51572.jpg) (http://s116.photobucket.com/user/sound_wavez/media/photo_zps19d51572.jpg.html)
an angle that shows how the AGP is blockier than the forearm:
(http://i116.photobucket.com/albums/o8/sound_wavez/photo_zps49d2e994.jpg) (http://s116.photobucket.com/user/sound_wavez/media/photo_zps49d2e994.jpg.html)
Post by: 808gmac on August 22, 2013, 07:36:25 PM
Post by: keliishaine on August 23, 2013, 12:01:39 PM
Post by: hepcat96821 on August 23, 2013, 03:52:43 PM
Post by: Jbaroune on October 17, 2013, 09:03:33 PM
Post by: djsmiles808 on October 17, 2013, 09:10:11 PM
Just finished mine. Gonna swap out the handguard for a quad rail thats 2" shorter.thats a beautiful 22 :thumbsup: what stock is that?
Post by: Jbaroune on October 17, 2013, 09:21:21 PM
Post by: Antithesis on October 18, 2013, 11:47:26 AM
My next project... as soon as it is finally released, that is!
(http://www.hightowerarmory.com/v/vspfiles/assets/images/hta%20main%209.jpg)
Wow, I've been telling my friends for years how much I want somebody to build a P90 in .22!
Post by: SpeedTek on October 18, 2013, 11:57:28 AM
Trying to make the charging handle really function.
Couldn't finish it in time for the gun show.
Need to extend the barrel and pin and weld the flash hider
On to be Legal.
Post by: BLKDRGN on October 19, 2013, 12:17:57 PM
Post by: Jbaroune on October 19, 2013, 12:31:06 PM
Post by: BLKDRGN on October 19, 2013, 12:43:16 PM
Just the trigger or whole trigger group & housing?
The whole housing. I have two single stages. One with the speed lever at 2 1/2lbs and the other is sportsman at 2lbs.
http://www.coolguyguns.com/Single-Stage-Ruger-10-22-Trigger_p_29.html (http://www.coolguyguns.com/Single-Stage-Ruger-10-22-Trigger_p_29.html)
Post by: Pit808 on October 26, 2013, 12:36:28 AM
to a bull barrel in a OD green hogue stock and target scope...
to a iron sighted blued standard barrel with black spray painted receiver that lived in a M1 carbine clone stock....
back to the OD hogue stock with fiber optic sights / red dot..
now this.......HTA 90/20
(http://i1096.photobucket.com/albums/g321/toyupload/CAM00074_zps5f97f9f9.jpg) (http://s1096.photobucket.com/user/toyupload/media/CAM00074_zps5f97f9f9.jpg.html)
(http://i1096.photobucket.com/albums/g321/toyupload/CAM00075_zps37453167.jpg) (http://s1096.photobucket.com/user/toyupload/media/CAM00075_zps37453167.jpg.html)
Post by: Antithesis on October 27, 2013, 12:09:15 AM
Post by: Pit808 on October 27, 2013, 01:52:47 PM
^ looks great, Pit808. What are your thoughts on it so far? Any issues or complaints?
Barrel shroud could have been better if it was made as a solid piece. The 2 piece design shows the lines down the shroud where it comes together. The better your trigger is before the stock, the better it will be after. My trigger had a lot of pre-travel before install, so it is magnified with the addition of the trigger bar. The trigger bar doesn't flex at all, so upgrading the trigger should give great results. I haven't had the chance to fire it yet, but it function checks just fine. The fit is great and everything feels as solid as if it was a actual build, not a drop in stock.
It's nice that both the p90 trigger safety and factory safety both function. The top rail is attached to only one side of the shell, so no need to remove the optic when disassembling. It should return to zero (or close enough for red dot) once put back together given the super tight fit of the stock.
Overall, I really like it! I do recommend HTA's accessories that include their extended mag and bolt release. They are longer than normal extended controls so you don't need to reach way up in the stock. Their 2 mag coupler also works well and gives it more of a p90 look without a bx25 sticking out the bottom.
Just gotta go shoot the damn thing now.....
Post by: Kingkeoni on October 27, 2013, 02:08:24 PM
Barrel shroud could have been better if it was made as a solid piece. The 2 piece design shows the lines down the shroud where it comes together. The better your trigger is before the stock, the better it will be after. My trigger had a lot of pre-travel before install, so it is magnified with the addition of the trigger bar. The trigger bar doesn't flex at all, so upgrading the trigger should give great results. I haven't had the chance to fire it yet, but it function checks just fine. The fit is great and everything feels as solid as if it was a actual build, not a drop in stock.
It's nice that both the p90 trigger safety and factory safety both function. The top rail is attached to only one side of the shell, so no need to remove the optic when disassembling. It should return to zero (or close enough for red dot) once put back together given the super tight fit of the stock.
Overall, I really like it! I do recommend HTA's accessories that include their extended mag and bolt release. They are longer than normal extended controls so you don't need to reach way up in the stock. Their 2 mag coupler also works well and gives it more of a p90 look without a bx25 sticking out the bottom.
Just gotta go shoot the damn thing now.....
If the barrel is threaded you can replace that shroud with a better one.
http://www.kineti-tech.com/1-2-x-28-threaded-for-22-223-556/ (http://www.kineti-tech.com/1-2-x-28-threaded-for-22-223-556/)
Post by: Pit808 on October 27, 2013, 02:25:22 PM
If the barrel is threaded you can replace that shroud with a better one.
http://www.kineti-tech.com/1-2-x-28-threaded-for-22-223-556/ (http://www.kineti-tech.com/1-2-x-28-threaded-for-22-223-556/)
No threads here....bummer. But....just gives me a reason to get that threaded aluminum barrel.....
Thanks for the link homie!
Post by: TastesLikeMetal on December 30, 2013, 09:42:26 PM
(http://i42.tinypic.com/r9fw20.jpg)
(http://i42.tinypic.com/28r2j5x.jpg)
Post by: Bigkahuna808 on December 30, 2013, 10:09:11 PM
FINALLY, It's finished for now...
(http://i42.tinypic.com/r9fw20.jpg)
(http://i42.tinypic.com/28r2j5x.jpg)
Sweet! What's the setup?
Post by: TastesLikeMetal on December 30, 2013, 10:42:27 PM
I Started with a Stock Ruger, figured why start with something I would eventually replace everything on.
Boyds Tacticool Stock
F.J. Feddersen 16.25 Bull Barrel
Volquartsen VQ HP Action Kit
Tac Sol Scope Rail
Burris Fullfield 3X-9X-40mm
Volquartsen Misc. other stuff
I worked a Magpul MOE Rail and mounted it on the stock so I could use my Harris BRMS with a DLOC-S
Harris BRM-S 6-9" Bipod, Alamo Four Star DLOC-S and SARG Knob (http://www.youtube.com/watch?v=lfRkjW8wfdA#)
I wanted a Bipod I could use on this or my AR, instead of having multiple Bipods.
Post by: suka on December 31, 2013, 02:54:56 AM
Post by: powder monkey on December 31, 2013, 09:35:42 AM
Post by: suka on January 01, 2014, 01:57:00 AM
Quote
.I saw this at Koko Head today. It is a dress-up kit with dummy 5.56mm NATO belt. The magazine is stock 10/22 and hidden under all the cosmetics
That's me i think
Post by: suka on January 01, 2014, 01:59:24 AM
Post by: macsak on January 01, 2014, 06:19:04 AM
M240
notice:
no tears in the van seats and empty benches
must've been a long time ago when that picture was taken
Post by: Kingkeoni on January 01, 2014, 08:05:05 AM
notice:
no tears in the van seats and empty benches
must've been a long time ago when that picture was taken
Notice:
Her ear protection isn't covering her ears
Post by: TastesLikeMetal on January 01, 2014, 09:21:06 AM
M240
Kawaii, get um Gramma! ;D
Post by: suka on January 01, 2014, 09:28:08 AM
notice:
no tears in the van seats and empty benches
must've been a long time ago when that picture was taken
just a few month ago
But about 340pm
Post by: stangzilla on October 10, 2014, 07:45:09 AM
(http://i243.photobucket.com/albums/ff26/onederful100/10-22scope.jpg) (http://s243.photobucket.com/user/onederful100/media/10-22scope.jpg.html)
Post by: llort on October 15, 2014, 07:58:38 AM
Post by: stangzilla on October 15, 2014, 01:14:56 PM
try again.
new scope:
(http://i243.photobucket.com/albums/ff26/onederful100/guns/10-22scope.jpg) (http://s243.photobucket.com/user/onederful100/media/guns/10-22scope.jpg.html)
Post by: stangzilla on October 21, 2014, 12:39:58 PM
(https://scontent-a-lga.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/10660080_789429474429343_426708403889611078_n.jpg?oh=add996441a824928bf6d26c20efef0b7&oe=54EFFFE3)
(http://static.squarespace.com/static/5283da60e4b00fa592e5cf07/542d4841e4b05ce683dfe908/543c7949e4b040fc4bad7b76/1413249353637/gator.jpg?format=1000w)
Post by: Kingkeoni on October 21, 2014, 08:49:37 PM
new Gator edition 10/22
(https://scontent-a-lga.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/10660080_789429474429343_426708403889611078_n.jpg?oh=add996441a824928bf6d26c20efef0b7&oe=54EFFFE3)
(http://static.squarespace.com/static/5283da60e4b00fa592e5cf07/542d4841e4b05ce683dfe908/543c7949e4b040fc4bad7b76/1413249353637/gator.jpg?format=1000w)
Wow, that looks so cool. Now if they'd just make it in a takedown model with a threaded barrel, it'd be perfect.
Post by: dustoff003 on October 21, 2014, 09:47:43 PM
Wow, that looks so cool. Now if they'd just make it in a takedown model with a threaded barrel, it'd be perfect.
KK they do make one TD with a threaded barrel http://www.ruger.com/products/1022Takedown/models.html model 11112
Post by: Kingkeoni on October 22, 2014, 06:32:36 PM
KK they do make one TD with a threaded barrel http://www.ruger.com/products/1022Takedown/models.html (http://www.ruger.com/products/1022Takedown/models.html) model 11112
Not the gator edition, they don't.
I want a 10/22 takedown threaded gator edition
Post by: dustoff003 on October 22, 2014, 07:35:24 PM
Not the gator edition, they don't.oh I gotcha now. buy two and have some custom work done?
I want a 10/22 takedown threaded gator edition
Post by: Kingkeoni on October 22, 2014, 07:36:39 PM
oh I gotcha now. buy two and have some custom work done?
I know, but as soon as I do,that, they'll come out with it. Hahaha
Post by: Inspector on May 16, 2016, 11:58:18 AM
Post by: Bushido on May 16, 2016, 05:59:04 PM
I want to revive this old thread. Maybe some more people will post photos of their 10/22's.
Lmao I was thinking the same thing. I'm curious to hear what some are doing to make their 10/22s better and what are their results.
Post by: Bushido on May 16, 2016, 06:20:04 PM
Post by: myanmar1 on May 16, 2016, 06:30:57 PM
HS-T 6-24x50 and a stock from Boyds
Post by: Bushido on May 16, 2016, 07:21:46 PM
Post by: Bushido on May 16, 2016, 07:22:49 PM
Ruger/Kidd build, waiting on a Vortex
HS-T 6-24x50 and a stock from Boyds
Details and a range report when you get it all together please
Post by: myanmar1 on May 16, 2016, 07:56:04 PM
Details and a range report when you get it all together please
Will do! :thumbsup:
Post by: myanmar1 on May 16, 2016, 07:58:30 PM
My baby
Nice looking setup here, Specs?
Post by: Bushido on May 16, 2016, 09:15:21 PM
Nice looking setup here, Specs?
This rifle evolved over 10 years so details is cloudy.
Factory 10/22 receiver and aluminum trigger housing
B&C Anshutz thumbhole stock. Pillar and glass bedded, adjustable cheek rest- owner
GM SS Fluted 20" .920" 1:16 barrel
Rimfire Tech full width trigger, torsion spring and over travel stop.
Power Kustom adjustable hammer and sear
Radiused, polished and trued bolt. Polished firing pin- owner
EGW 20 moa base
Vortex rings
Millet TRS-1 scope
Many more smaller parts but cost wasn't as bad as it sounds. The barrel and several other parts were used.
Post by: XL iced_coffee on May 29, 2016, 04:00:21 PM
So many variations and endless options...don't even know where to begin........ Huh😩......... Hopefully one day I'll get one
Post by: dustoff003 on May 29, 2016, 04:36:22 PM
Everybody has really cool 10/22s.....except for meOGC has a Memorial Day sale,
So many variations and endless options...don't even know where to begin........ Huh......... Hopefully one day I'll get one
10/22 TAKEDOWN STAINLESS 22LR RIFLE REG $349-399 SALE $300!
Sent from my iPhone using Tapatalk
Post by: Inspector on May 29, 2016, 06:41:57 PM
Everybody has really cool 10/22s.....except for me😢😢A good place to start is Rimfire Central. Another great forum.
So many variations and endless options...don't even know where to begin........ Huh😩......... Hopefully one day I'll get one
Post by: Bushido on May 30, 2016, 07:27:27 AM
Everybody has really cool 10/22s.....except for me
So many variations and endless options...don't even know where to begin........ Huh
Don't look past a factory stock 10/22 either. My daughter has a completely stock rifle with a 2-7 scope. It shoots impressively well.
Sent from my iPhone using Tapatalk
Post by: Inspector on May 30, 2016, 02:30:49 PM
Don't look past a factory stock 10/22 either. My daughter has a completely stock rifle with a 2-7 scope. It shoots impressively well.:thumbsup: :thumbsup: :thumbsup:
Sent from my iPhone using Tapatalk
Post by: XL iced_coffee on May 30, 2016, 03:25:52 PM
Post by: Inspector on May 30, 2016, 03:53:46 PM
That's exactly what I'm talking about , too many choices and options, it's like getting my first ar again , can't decide where to beginWell then allow me to make a couple of recommendations just to help you narrow down your choices a bit. If your main goal is to go for looks (other than the stock), that looks really really cool (for instance colors other than black and stainless) then Tactical Solutions and Voquartzen are probably your best choices as they provide good performance with good looks. Volquartzen being the better performing parts of those two. But Tactical Solutions has some even cooler looking pieces. On the other hand, if performance is your main goal and cool looks with either black or stainless is what you want then go with Kidd Innovations parts. For stocks it is such a personal choice I won't even try to steer you in any direction. Except that I have a few stocks by Boyd's and their stocks are of good quality. :thumbsup: :thumbsup: :thumbsup:
Post by: XL iced_coffee on May 30, 2016, 03:56:47 PM
Post by: Bushido on May 30, 2016, 07:38:15 PM
A good place to start is Rimfire Central. Another great forum.
This forum has cost me many many many of dollars. Pure evil!! Lmao
Sent from my iPhone using Tapatalk
Post by: Inspector on May 31, 2016, 04:42:19 AM
This forum has cost me many many many of dollars. Pure evil!! LmaoYeah, 10/22 Ultimate Build. I took any and all side jobs I could to afford the 2 I have. I would love to have a third. :shake: :shake: :shake:
Sent from my iPhone using Tapatalk
Post by: Bushido on May 31, 2016, 08:48:51 PM
Post by: Inspector on June 01, 2016, 06:30:13 AM
I see quite a bit of impressive 10/22s when I shoot at KHSC. Far more "bling" than my humble build. I was curious as to know how many of you were Rimfire Central members and if any participate in the 22 rimfire challenge. Any of you in the 1/2"@50 or "The Holy Grail" club? I've shot many a sub 1/2" groups in my time but not any targets that would qualify. 3 of 4 targets sub MOA is hard with a 22. I go under the same username there.I shot in the their rimfire challenge many many years ago. I never bothered to post my targets as I was ashamed. :wtf: :wtf: :wtf:
I suppose when I was testing my first 10/22 build or testing ammo in my Annie I probably had an occasional 0.50" @ 50yds. But with the winds out here even when there feels like there is no wind, you put a flag out there and it swirls around.
I go under the name "Kona Dave" over there. I usually hang out/monitor the Annie, High Standard, Marlin and ammunition sections. I usually try and just cruise by the 10/22 sections as I am too weak to resist doing another build. :rofl: :rofl: :rofl:
Post by: Bushido on June 01, 2016, 11:21:19 AM
I shot in the their rimfire challenge many many years ago. I never bothered to post my targets as I was ashamed. :wtf: :wtf: :wtf:
Same here. To me having 1 group in the .4s is impressive. You need to have 3 of 4 just to qualify. The funny part is the top 5 in the 50y challenge are all in the .1s. Wow. .4 and .5s are what they are scoring in the Holy Grail 100y challenge.
Sent from my iPhone using Tapatalk
Post by: Inspector on June 01, 2016, 11:58:24 AM
Same here. To me having 1 group in the .4s is impressive. You need to have 3 of 4 just to qualify. The funny part is the top 5 in the 50y challenge are all in the .1s. Wow. .4 and .5s are what they are scoring in the Holy Grail 100y challenge.Makes you wonder...
Sent from my iPhone using Tapatalk
Some people have to be the best no matter what. It could very easily be that someone shot a target at 5yds or 10 or 25....and lied. Or even used a .223/5.56 rifle to make the holes. Who knows? I never have seen any .22 rifle be that accurate outside where even the slightest wind will adversely affect your bullets.
That's why I didn't bother to upload my targets because not only was I ashamed of my lousy target that was far from perfect, but I suspect some of those guys were cheating. I'm just doing this for the fun of it. I hope those that didn't upload their targets had fun. That is the point of all of this.
Post by: Bushido on June 01, 2016, 06:29:25 PM
I'm part of a few rimfire groups on Facebook. I've got into discussions with several shooters that say their 10/22 will shoot sub 1" @ 100y with Remington Golden Bullets all day. When I call them out on it and tell them to shoot the Holy Grail target and post it. ZERO has done so. I shoot 100 regularly with 22s, I know how hard it is to buck the wind at that distance
Post by: Inspector on June 01, 2016, 07:43:41 PM
Yes RFC is a huge forum with thousands of members, I'm sure some may be cheating but I do feel most of the well known guys are legit. Those that are leaders are known in the rimfire game and have their real names attached to their usernames. This guy although not a 10/22 really opens your eyes to how serious some guys get in the benchrest game http://www.6mmbr.com/gunweek078.html . Some have money to burn and beautiful weather and wind conditions to shoot from.Bench rest is a whole shooting sport all to it's own. While it takes skill it also takes expensive equipment.
I'm part of a few rimfire groups on Facebook. I've got into discussions with several shooters that say their 10/22 will shoot sub 1" @ 100y with Remington Golden Bullets all day. When I call them out on it and tell them to shoot the Holy Grail target and post it. ZERO has done so. I shoot 100 regularly with 22s, I know how hard it is to buck the wind at that distance
I have shot 1" at 100yds here occasionally. I find I have to use decent ammo to get that sort of result. I refuse to shoot Remington .22's, especially the Golden Bullets, due to how dirty they are. If they shot 1" at 100yds I would be very surprised. Maybe they have gotten better in the last few years? IDK. I have not had any for 3 or 4 years, maybe longer. It used to be the rumor that the golden bullets were the rejects from another line of cartridges they packaged better and charged more for. And they used to be only bulk packed. Not sure if they still only bulk pack them or not? They used to be in the same category as Thunderbolts and Wildcats. LOL
I had 3 boxes of Aguila Super Extra Standard Velocity I brought to the range last weekend. They are the bottom of the barrel Aguila target grade and has been selling for around $6/box. Yes it is expensive. My lightweight 10/22 loved them. Sub MOA at 50yds. I need to shoot more of them to make sure they are not a fluke. Now I have to find some.
I find it harder to shoot at plastic Easter eggs hanging and blowing around in the wind at 100yds. Next time I bring out the eggs I'll let everyone know and you guys can come by and take some pot shots at them.
Post by: sound wave on June 04, 2016, 12:59:02 PM
Anyways, I took that as an excuse to buy a barrel with a mounted picatinny rail. I am hoping that it won't matter as much how they hold it since the scope will move with the barrel now.
This is the Volquartsen carbon fiber 16.5" takedown bull-barrel with forend. The barrel/forend costed just as much as my rifle. :-[ Quality does seem excellent though. I just switched it out today so I need to re-zero it again.
Since my last post, I also changed out the scope mounts to Leupold low mounts and added some Butler Creek scope covers. I am not 100% happy with the AGP Arms folding buttstock, but I like that it is easy to carry on my motorcycle. If I owned a car, I think I would rather have the Magpul Hunter X-22 takedown stock conversion.
The only thing stock on my rifle now is the receiver. If I had a receiver I could build another rifle. hmm.... ;D
(http://i116.photobucket.com/albums/o8/sound_wavez/IMG_0803_zps6wrzgszz.jpg)
Post by: Bushido on June 04, 2016, 09:58:27 PM
Sent from my iPhone using Tapatalk
Post by: sound wave on June 04, 2016, 10:52:20 PM
Hmm.. You are right about the scope. Plus, with the way the scope is mounted now, it is too long and won't fit in my usual bag anymore. I just switched to this barrel today so I haven't tried transporting it yet.
I hope it is a shooter. It used to be.
I just did a search about the 22 fun shoot. Sounds fun. I don't know if I will be ready by this month. I am really bad at standing and shooting a rifle.
Post by: paka808 on June 04, 2016, 11:24:04 PM
Here is my new takedown setup. I was very happy with the accuracy of my last setup, but some of my friends had trouble shooting it. I am thinking since the scope was receiver-mounted, the POI would be affected depending on how they were holding the rifle. IDK.nice :thumbsup:
Anyways, I took that as an excuse to buy a barrel with a mounted picatinny rail. I am hoping that it won't matter as much how they hold it since the scope will move with the barrel now.
This is the Volquartsen carbon fiber 16.5" takedown bull-barrel with forend. The barrel/forend costed just as much as my rifle. :-[ Quality does seem excellent though. I just switched it out today so I need to re-zero it again.
Since my last post, I also changed out the scope mounts to Leupold low mounts and added some Butler Creek scope covers. I am not 100% happy with the AGP Arms folding buttstock, but I like that it is easy to carry on my motorcycle. If I owned a car, I think I would rather have the Magpul Hunter X-22 takedown stock conversion.
The only thing stock on my rifle now is the receiver. If I had a receiver I could build another rifle. hmm.... ;D
(http://i116.photobucket.com/albums/o8/sound_wavez/IMG_0803_zps6wrzgszz.jpg)
Post by: Bushido on June 05, 2016, 04:14:31 AM
Thanks. Yeah if I rode my bike, then I took it apart, put it in a bag, and put it in my top case.Something I thought about... A bunch of precision bolt gun shooters use the Larue Tactical one piece QD mounts, They regularly remove their scopes and reattach it. They say it's really solid, repeatable and holds zero every time, Of course they are not cheap. ;D With one you could remove the scope and maybe still fit it in your bag
Hmm.. You are right about the scope. Plus, with the way the scope is mounted now, it is too long and won't fit in my usual bag anymore. I just switched to this barrel today so I haven't tried transporting it yet.
I hope it is a shooter. It used to be.
I just did a search about the 22 fun shoot. Sounds fun. I don't know if I will be ready by this month. I am really bad at standing and shooting a rifle.
Please post an update on how it shoots. Might take a couple of trips to really see how it shoots. What kind of trigger group and bolt work have you done if any. Really cool build.
With the fun shoot, it really is just for fun. Standing is going to be tough but we got to practice it sooner or later. For me I like to shoot positions when I can. it's challenging and fun.
Sent from my iPhone using Tapatalk
Post by: sound wave on June 05, 2016, 07:56:33 AM
Something I thought about... A bunch of precision bolt gun shooters use the Larue Tactical one piece QD mounts, They regularly remove their scopes and reattach it. They say it's really solid, repeatable and holds zero every time, Of course they are not cheap. ;D With one you could remove the scope and maybe still fit it in your bag
Please post an update on how it shoots. Might take a couple of trips to really see how it shoots. What kind of trigger group and bolt work have you done if any. Really cool build.
With the fun shoot, it really is just for fun. Standing is going to be tough but we got to practice it sooner or later. For me I like to shoot positions when I can. it's challenging and fun.
I have Larue mounts on my AR and really like them. That is a good idea. I am presently gathering parts for a dedicated .22 AR upper build so I have to stop spending money on my 10/22 for the time being.
The trigger assembly is the Kidd single stage. Bolt is Kidd also. I also have the Kidd bolt buffer, charging handle assembly, and extended magazine release.
I got so much money in this rifle but I am sure someone with a stock rifle could still beat me. :( No amount of parts can make up for my lack of skill. Still, it is fun buying stuff and modding. :)
edit: thanks Paka
Post by: Bushido on June 06, 2016, 04:17:24 AM
Still, it is fun buying stuff and modding. :)
edit: thanks Paka
Absolutely!! I'm a life long hot rodder and auto technician. I enjoy doing as much as I can myself. I mod all my own bolts, pillar and glass bedding, trigger groups etc. Plus I'm low on funds
Sent from my iPhone using Tapatalk
Post by: suka on June 16, 2016, 03:01:10 PM
.
.
.
.
.
.
.
(http://www.perfectunion.com/vb/attachments/ruger-10-22/7150d1105105665-suppressed-10-22-post-66-1105105665.jpg)
Post by: Bushido on June 16, 2016, 07:56:43 PM
easy mod
.
.
.
.
.
.
.
(http://www.perfectunion.com/vb/attachments/ruger-10-22/7150d1105105665-suppressed-10-22-post-66-1105105665.jpg)
Oh boy don't give me ideas. Lmao. I have the tools to do something like this.
Post by: Bushido on July 12, 2016, 09:21:15 PM
Ruger/Kidd build, waiting on a Vortex
HS-T 6-24x50 and a stock from Boyds
Was just curious if you ever got around to finishing your project. I have a Viper PST scope and it's phenominal was wondering how you like the HST
Post by: suka on July 12, 2016, 09:57:35 PM
SOON...............
10/22 from 80% hrees the jig.
(http://i1327.photobucket.com/albums/u666/suka5168/IMG_1220_zpse76cf0bc.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_1220_zpse76cf0bc.jpg.html)
Completed 80% with 16" barrel
(http://i1327.photobucket.com/albums/u666/suka5168/ba_zpsvv9sjnem.jpg) (http://s1327.photobucket.com/user/suka5168/media/ba_zpsvv9sjnem.jpg.html)
Still need the pistol grip stock.
(http://d2ydh70d4b5xgv.cloudfront.net/images/c/3/ruger-10-22-charger-pistol-stock-tactical-grip-new-black-original-box-3fede7a9cb22ecedb1eda9abb791344d.jpg)
Post by: suka on July 12, 2016, 09:59:20 PM
(1) An ammunition magazine which attaches to the pistol outside of the pistol grip;
(2) A threaded barrel capable of accepting a barrel extender, flash suppressor, forward hand grip, or silencer;
(3) A shroud which is attached to or partially or completely encircles the barrel and which permits the shooter to hold the firearm with the second hand without being burned;
(4) A manufactured weight of fifty ounces or more when the pistol is unloaded;
(5) A centerfire pistol with an overall length of twelve inches or more; or
(6) It is a semiautomatic version of an automatic firearm;
but does not include a firearm with a barrel sixteen or more inches in length, an antique pistol as defined in this section or a curio or relic as those terms are used in 18 United States Code �921(16) or 27 Code of Federal Regulations 178.11.
Post by: Bushido on July 13, 2016, 06:39:37 PM
Hawaii legal 10/22 Pistol in the works.
SOON...............
10/22 from 80% hrees the jig.
(http://i1327.photobucket.com/albums/u666/suka5168/IMG_1220_zpse76cf0bc.jpg) (http://s1327.photobucket.com/user/suka5168/media/IMG_1220_zpse76cf0bc.jpg.html)
Completed 80% with 16" barrel
(http://i1327.photobucket.com/albums/u666/suka5168/ba_zpsvv9sjnem.jpg) (http://s1327.photobucket.com/user/suka5168/media/ba_zpsvv9sjnem.jpg.html)
Still need the pistol grip stock.
(http://d2ydh70d4b5xgv.cloudfront.net/images/c/3/ruger-10-22-charger-pistol-stock-tactical-grip-new-black-original-box-3fede7a9cb22ecedb1eda9abb791344d.jpg)
Very cool.
Sent from my iPhone using Tapatalk
Post by: Bushido on August 06, 2016, 09:25:30 PM
Sent from my iPhone using Tapatalk
Post by: oldfart on August 07, 2016, 08:08:09 AM
Bump for range reports and updates. Anybody been playing with their 10/22s?===========
Sent from my iPhone using Tapatalk
Last Wednesday, my son and I went to shoot my semi-custom 10/22.
He turned 21 this year so this rifle will be passed on to him.
I think that makes a fine birthday present for a young man.
It's NOT a camouflaged purple stocked-20x tactical scope-laser guided -volquartsen-frankenstein gun.
It does have a bull bbl, hogue stock, mildot scope and bipod. It's all black and nothing much to look at.
But it sure as hell shoots straight.
We had a good time banging a little steel groundhog at about 90 yds.
Post by: whynow? on August 13, 2016, 10:48:48 AM
This is for the regular full stock configuration but I plan to use my Vortex Sparc II when in the folding stock.
Post by: Bushido on August 13, 2016, 08:51:42 PM
For a vanilla flavor stock 10/22 I'm trying to decide between a Vortex Diamondback 2-7 X 35 scope and a Weaver 2-10 X 38 V series for up to 100 yds. The vortex is argon purged and has a good warranty while the weaver is made in Japan. Any thoughts on which is a better buy?
This is for the regular full stock configuration but I plan to use my Vortex Sparc II when in the folding stock.
I have a Vortex Viper PST and really love the glass. I can't comment on the Diamondback though sorry. I do own a Mueler APV 4.5-14 ($114 Amazon free shipping) and my daughter has the 2-7 APV. They are great "All Purpouse Scopes" with lifetime warranty. I've owned 5 Muellers. Great scopes, good prices and service.
Post by: whynow? on August 13, 2016, 09:31:37 PM
I have a Vortex Viper PST and really love the glass. I can't comment on the Diamondback though sorry. I do own a Mueler APV 4.5-14 ($114 Amazon free shipping) and my daughter has the 2-7 APV. They are great "All Purpouse Scopes" with lifetime warranty. I've owned 5 Muellers. Great scopes, good prices and service.Thanks for the info on Mueler scopes.
The Viper PST is a big step above the Diamondback. I will get a Viper PST in the future for my SPR AR as the glass is good, but probably only go with SFP since FFP is too much for me to justify my uses.
Although I like Vortex red dots, I decided to go with the Weaver after reading some online reviews. My 1st Weaver so hope I'm not disappointed, if it's not to my liking, Brownells has a good return policy and may look at the Mueler 2-7 illuminated reticle.
Haven't shot my 10/22 in 7-8 years
Post by: Bushido on August 14, 2016, 09:39:25 AM
If you or anyone wants to take a look through one of my Muellers, let me know.
Sent from my iPhone using Tapatalk
Post by: whynow? on August 14, 2016, 03:04:14 PM
Yes my Viper is not on my 22s. I don't have that kind of money for glass on a 22.Thanks.
If you or anyone wants to take a look through one of my Muellers, let me know.
Sent from my iPhone using Tapatalk
Post by: Bushido on January 03, 2017, 07:52:04 PM
Post by: ICblk01GT on January 03, 2017, 09:40:32 PM
(http://i430.photobucket.com/albums/qq24/ICblk01GT/Picture008a.jpg) (http://s430.photobucket.com/user/ICblk01GT/media/Picture008a.jpg.html)
(http://i430.photobucket.com/albums/qq24/ICblk01GT/Picture007a.jpg) (http://s430.photobucket.com/user/ICblk01GT/media/Picture007a.jpg.html)
Post by: Bushido on January 03, 2017, 09:57:57 PM
Nothing fancy..... :D
(http://i430.photobucket.com/albums/qq24/ICblk01GT/Picture008a.jpg) (http://s430.photobucket.com/user/ICblk01GT/media/Picture008a.jpg.html)
(http://i430.photobucket.com/albums/qq24/ICblk01GT/Picture007a.jpg) (http://s430.photobucket.com/user/ICblk01GT/media/Picture007a.jpg.html)
Looks like a shooter to me. Nice build
Post by: ICblk01GT on January 03, 2017, 10:01:53 PM
Post by: Inspector on January 04, 2017, 04:24:45 AM
Nothing fancy..... :DNICE! What barrel is that?
(http://i430.photobucket.com/albums/qq24/ICblk01GT/Picture008a.jpg) (http://s430.photobucket.com/user/ICblk01GT/media/Picture008a.jpg.html)
(http://i430.photobucket.com/albums/qq24/ICblk01GT/Picture007a.jpg) (http://s430.photobucket.com/user/ICblk01GT/media/Picture007a.jpg.html)
Post by: ICblk01GT on January 04, 2017, 06:06:11 AM
Post by: esk808 on January 05, 2017, 05:53:36 PM
See KIDD International website: http://www.coolguyguns.com/
Received from Kidd in early November, via the good people at OGC
10/22 22LR design but built by Kidd, not Ruger
20" SS .920" fluted bull barrel w/ muzzle brake
2-stage flat trigger: 1st stage - 3oz. 2nd stage - 3 oz.
Magpul stock gray X22
Nightforce 8-32 x 56mm Precision Benchrest scope in Larue LT120 QD mount
Accuracy 1st scope bubble level
Atlas bipod with Larue QD picatinny mount
Additional interchangeable barrel: 20" SS .920" bull barrel - no flutes, no muzzle brake, just put on a Harrell tuner on the muzzle to fool with barrel harmonics.
Update: March 2017: Received my MPOD bipod from Mystic Precision in March 2017. It's different than the Atlas bipod, since the MPOD is rated for F-class shooting.... and MPOD is stable.
Post by: Bushido on January 05, 2017, 07:50:56 PM
Kidd Supergrade with 2 barrels (interchangeable)
Received from Kidd in early November, via the good people at OGC
10/22 22LR
20" SS .920" fluted bull barrel w muzzle brake
2-stage trigger pulls: 3oz./3oz.
Magpul stock gray X22
Nightforce 8-32 x 56mm Precision Benchrest scope in Larue QD mount
Accuracy 1st scope bubble
Atlas bipod with Larue QD mount
Additional interchangeable barrel: 20" SS .920" bull barrel - no flutes, no muzzle brake, just put on a Harrell tuner on the muzzle to fool with barrel harmonics.
I saw you shooting one day. Beautiful rifle if I may say so. Please join us in our upcoming rimfire fun shoot. As well join in on our 2A rimfire monthly shoots.
Post by: Bushido on January 05, 2017, 07:54:23 PM
Post by: esk808 on January 06, 2017, 12:53:25 AM
Thanks for the kind words.
Post by: esk808 on January 06, 2017, 03:09:38 PM
It's a Tactical Solutions x-ring barrel, Hogue stock, Harris bipod, and a BSA scope. I'd like to eventually replace the trigger assy then it will be finished.
Recommend the Kidd 10/22 trigger assembly: 2-stage trigger 3oz./3oz.= 6oz. total, for benchrest shooting.
If going hunting, then the 2-stage trigger 8oz./8oz.= 1lb. total, or maybe even 1lb./1lb.
http://www.coolguyguns.com/TRIGGERS_c_7.html
If you go Kokohead on weekends, late afternoon, you are welcome to try my 3oz./3oz. trigger.
Post by: ICblk01GT on January 06, 2017, 03:27:51 PM
Post by: Bushido on January 07, 2017, 07:06:03 PM
Post by: Bushido on August 16, 2017, 08:51:39 PM
https://2ahawaii.com/index.php?topic=26090.0
Post by: JMB on May 10, 2018, 07:40:44 AM
16" Kidd Ultralight
B&C Light tactical/Archangel precision
Leupold 2-7x33
Post by: Bushido on May 13, 2018, 09:01:04 AM
Same 10/22 just with different stocks :shaka:
16" Kidd Ultralight
B&C Light tactical/Archangel precision
Leupold 2-7x33
Nice JMB! How do you like that barrel? I've read that is Kidd's only barrel that doesn't come with their MOA guarantee.
Post by: JMB on May 13, 2018, 10:31:16 AM
Nice JMB! How do you like that barrel? I've read that is Kidd's only barrel that doesn't come with their MOA guarantee.thnx Bushido👍🏼 Haven't had the chance to shoot it on paper yet. I've pretty much got it sighted in on the steel targets on the silhouette side. Hopefully I can get some groups soon.
Post by: Bushido on May 13, 2018, 06:21:43 PM
thnx Bushido👍🏼 Haven't had the chance to shoot it on paper yet. I've pretty much got it sighted in on the steel targets on the silhouette side. Hopefully I can get some groups soon.
Would love to hear how it shoots. Either way, very nice build for sure!!
Post by: Bushido on June 10, 2018, 08:29:40 PM
Post by: michaelkih on June 11, 2018, 10:42:44 PM
https://www.youtube.com/watch?v=4NvrpNwtzkw
Post by: Flapp_Jackson on June 11, 2018, 11:48:07 PM
Here's one of my integrally suppressed 10/22s. I port the barrels to make it run like an MP5SD so it actually turns super sonic ammo subsonic then the suppressor gets rid of the report. It is laughably quiet. ;)
Nice gun & video. :thumbsup: :thumbsup:
About the porting -- if the ammo runs subsonic due to the ports, why not use subsonic ammo in a non-ported barrel?
Velocity is what creates the sonic report, right? So, would using subsonic ammo in a non-ported barrel not have the same ballistics as supersonic in the ported one?
Just curious. Thanks.
Post by: michaelkih on June 11, 2018, 11:57:10 PM
Nice gun & video. :thumbsup: :thumbsup:
About the porting -- if the ammo runs subsonic due to the ports, why not use subsonic ammo in a non-ported barrel?
Velocity is what creates the sonic report, right? So, would using subsonic ammo in a non-ported barrel not have the same ballistics as supersonic in the ported one?
Just curious. Thanks.
So that I can use standard ammo. Subsonic ammo is always harder to find and more expensive. This way I can just use the standard ammo sold is 555 round packs for cheap. It's an excellent cheap fun gun to buy as well as to shoot now. Yes, the velocity of the bullet breaking the sound barrier creates the sonic report.
Post by: Flapp_Jackson on June 12, 2018, 12:06:17 AM
So that I can use standard ammo. Subsonic ammo is always harder to find and more expensive. This way I can just use the standard ammo sold is 555 round packs for cheap. It's an excellent cheap fun gun to buy as well as to shoot now. Yes, the velocity of the bullet breaking the sound barrier creates the sonic report.
That was my guess. I know subsonic .22LR is not as available, but not sure what the prices are.
I saw a video on YT that demonstrated if you intend to shoot .22LR at long distances, it's best to use subsonic. Avoiding breaking the sound barrier stops the bullet from wobbling when it comes back down to subsonic speed. I forget the distances shown, but I believe it was at least 500 yds.
Post by: michaelkih on June 12, 2018, 03:42:51 PM
That was my guess. I know subsonic .22LR is not as available, but not sure what the prices are.
I saw a video on YT that demonstrated if you intend to shoot .22LR at long distances, it's best to use subsonic. Avoiding breaking the sound barrier stops the bullet from wobbling when it comes back down to subsonic speed. I forget the distances shown, but I believe it was at least 500 yds.
500 yards would be hard to do with subsonic 22lr I think. I know I have a HUGE drop with this gun when I'm shooting at just 120 yards with it. But I am no expert.
Post by: Bushido on June 12, 2018, 07:21:40 PM
Here's one of my integrally suppressed 10/22s. I port the barrels to make it run like an MP5SD so it actually turns super sonic ammo subsonic then the suppressor gets rid of the report. It is laughably quiet. ;)
https://www.youtube.com/watch?v=4NvrpNwtzkw
Very cool!!
Post by: Bushido on June 12, 2018, 07:28:12 PM
Subsonic ammo is the way to go if shooting long range with a 22lr. High Velocity, let's say 1250fps like Blazers, goes transonic ("wobbly range") before 100y. High velocity 22lr is also afffected by wind drift more than subsonic ammo contrary to belief. Most if not all match ammo is subsonic in the 1050fps range.
I saw a video on YT that demonstrated if you intend to shoot .22LR at long distances, it's best to use subsonic. Avoiding breaking the sound barrier stops the bullet from wobbling when it comes back down to subsonic speed.
Post by: michaelkih on June 13, 2018, 03:06:15 PM
Subsonic ammo is the way to go if shooting long range with a 22lr. High Velocity, let's say 1250fps like Blazers, goes transonic ("wobbly range") before 100y. High velocity 22lr is also afffected by wind drift more than subsonic ammo contrary to belief. Most if not all match ammo is subsonic in the 1050fps range.
Good info
Post by: changemyoil66 on July 13, 2018, 09:57:59 AM
Reasoning:
-Looks "tacticool". Which means I won't spend just as much on modifying it (main reason)
-It comes in black
-Grouping expectations: Tangarine size at 50 yards. My expectations aren't rounds touching yet...
-Didn't want a 15/22 (already own an AR and same rifle is boring to me)
-Bday gift from the wife
Post by: Bushido on July 13, 2018, 08:01:03 PM
Really close to narrowing it down to the Ruger Precision Rimfire.
Reasoning:
-Looks "tacticool". Which means I won't spend just as much on modifying it (main reason)
-It comes in black
-Grouping expectations: Tangarine size at 50 yards. My expectations aren't rounds touching yet...
-Didn't want a 15/22 (already own an AR and same rifle is boring to me)
-Bday gift from the wife
The Ruger Precision Rimfire is a decent rifle. Like most rifles it has it's goods and bads. With good fundamentals and decent ammo, you can easily beat a tangerine at 50y. When you learn wind calls, you can beat that at 100.