Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - RKBA

Pages: [1] 2 3 4
1
General Discussion / Re: Gunshops in Reno, NV
« on: November 03, 2016, 03:05:17 PM »
In addition to Cabela's, check out Scheel's in Sparks. It's on the east end of the city along I80. Can't miss it. It's an enormous sporting goods store and the nice thing about it is most of the rifles and shotguns are "over the counter" so you can pick up and handle any one you want.

2
Sent testimony on all 5 bills (again). Our legislators interpret a lack of testimony from us as "we're okay with it".  It only takes a few minutes to send testimony. Let's send them a clear message that we don't want these bills.
3
Legal and Activism / Re: Senate needs your testimony BY 2:45pm TOMORROW
« on: February 10, 2015, 12:12:58 PM »
Testimony submitted.
4
Testimony submitted
5
Legal and Activism / CCW Ban in Washington DC struck down
« on: July 26, 2014, 11:53:27 AM »
District court rules that a total ban on carrying firearms in public is unconstitutional. And in Washington DC of all places. 

http://alangura.com/2014/07/victory-in-palmer-v-d-c/
6
Legal and Activism / Re: Win in Baker
« on: March 20, 2014, 10:46:26 AM »
When I first read about this lawsuit a few years ago, I never dreamt this day would come so soon. I can't thank you guys enough.
7
This is awesome news. 2014 is off to a good start.
8
General Discussion / Re: Maui Ukumehame Range Question
« on: February 12, 2014, 01:29:41 PM »
I would bring cardboard about 20" wide by 36" tall. Maybe slightly bigger to be safe. You can bring your own target stands if you want, but it's not necessary. I have my own stands and bases but just use the ones provided.
9
Reloading / Re: Copper plated bullets.
« on: February 08, 2014, 05:16:57 PM »
Most manufacturers of copper plated bullets do not recommend velocities over 1,300 to 1,500fps. .308 copper plated bullets are probably meant for subsonic .300 Blackout loads, not .308 Winchester loads.
10
General Discussion / Re: Help ordering Butler Creek Scope Covers
« on: November 21, 2013, 03:45:52 PM »
Cause they are not very specific like Butler Creek. One of my scopes says objective is 50mm. Butler Creek has 49.8 and 50.7. Which one is it? They also don't list the eye piece size.

Gotcha, I see what you're saying. My scope had a manual that listed all the dimensions of the scope, including the outside dimensions of the objective bell and eyepiece so I just went with that. But it sounds like you have access to a caliper so that's the way to go.
11
General Discussion / Re: Help ordering Butler Creek Scope Covers
« on: November 21, 2013, 11:35:47 AM »
If you're trying to find the ocular and objective diameters, why not use the scope manufacturers specs?
12
Hunting / Re: Lanai Axis / sheep hunting tips?
« on: November 20, 2013, 01:09:16 PM »
Go a day early if you can. If you're unfamiliar with the island, that's the best advice I can give. If you do get there a day early, go straight to the DLNR office in Lanai City and get your tags. Then hit the range (outside Lanai City, on the way to Manele) and sight in. Then spend the rest of day checking out the different areas.There's 2 Units, but they cover about half of the island. Drive around and get familiar with the island. Decide on a plan and what areas you want to hunt beforehand. You don't want to be driving around in the dark at 6:00 am not knowing where to go. Plus a lot of guys will be out there too so don't just pick one spot, come up with numerous ones in case someone gets there before you do. If you need food supplies, go to the stores before 7:00 pm because by the time they open the next day you should be out in the field already.

Find a spot with good visibility. If at all possible, my brother and I will sit facing opposite directions and he'll cover 180 degrees and I'll cover the other 180 degrees. Wait, glass, and hope you see something. Assume the game can see better than you can and keep movement to a minimum. Once someone fires a shot within a mile of you, the game scatters and that area is done for at least a few hours. So make your shot count. When they scatter, they run until they're over the horizon. So other hunting groups are continually pushing the game towards each other all day long. So be patient, you never know when a herd might be coming your way. Around mid-day the game is bedding down. So eat lunch, go back to town, or take a nap in field. Start hunting again around 3:00 or 4:00. And most importantly, have fun. They lower your expectations are, the more fun you'll have.

Expect to see lots of deer and no mouflon in mouflon season, and lots of mouflon and no deer in deer season.  :(
13
Suppressor by a mile.

I could shoot .22's at my house (and a lot of other places) without freaking people out.
If I ever had to fire a weapon indoors for self-defense, I wouldn't have to worry about blowing my eardrums.
It would make hunting more pleasant and reduce scaring game away after one shot.

SBR's look cool, but it wouldn't make shooting safer or more pleasant.
14
Off Topic / Re: WTH does your forum name mean ?
« on: August 17, 2013, 12:51:52 PM »
RKBA: Right to Keep and Bear Arms.

The primary reason I follow this site is to keep on top of legislation at the State level. So I figured I'd match my screen name with my purpose on being here.
15
If you're looking at Glocks, the most versatile would be the .40 caliber versions (G22, G23, G27, and G35). You can switch to 9mm and .357 sig. Add in a .22 conversion kit and you can use 4 calibers with one firearm.
Realistically though, .357 sig isn't very popular so finding ammo might be difficult which means you're probably looking at just shooting .40 and 9mm. Which aren't bad choices in my opinion.
16
Technical Support / Re: Glock Mags???
« on: July 19, 2013, 12:50:24 PM »
I know you said "good website" but I got my last few Glock mags off of ebay. I got them in 3 days or so. I just used "buy it now" instead of bidding on them and bought it from a seller with a really good rating. It was around $35 with shipping which isn't too bad considering I couldn't find them anywhere else. I searched high and low but none of the normal places I shop had any (Midway, Brownells, AIM, CDNN, Glockparts, my local stores, etc...). The extra $5 or so was worth it for me.
17
Reloading / Re: Reloading 7.62x39
« on: June 20, 2013, 10:39:41 AM »
That's a question only you can answer. Whenever I decide to load a new caliber, I factor in the cost of loaded ammo versus the cost of dies, shell plates, and other reloading tools. Then I add the cost of components. At what point do you break even? After 1,000 rounds? After 5,000 rounds? Are you planning on shooting it that much? For example when I priced out loading 9mm a year ago, the extra tools I needed cost about $150. Components to reload 9mm was about $160 a case since I already had the brass. A case of store bought ammo was around $300. So for me, I broke even just loading 1,000 rounds of 9mm. Complete no brainer for me because I normally shoot that much in a few months.

So I suggest you do the math and figure out if it makes it worth it for you.  :thumbsup:
18
Reloading / Re: How do you guys work on loads?
« on: June 14, 2013, 07:30:05 PM »
Do you guys notice if one thing effects your results more than another besides bullet and powder weights?  Does different light/heavy crimps, different primers, OAL make more of a difference than another?

For me I only get super anal with precision rounds in .308. I don't know anyone who crimps precision rounds and haven't noticed any measurable difference by switching primers. Adjusting overall length improves my groups, but not by much. To be honest if I were loading .300 blackout for an AR, I wouldn't worry about how much of a difference the crimp or primers would make. And be careful with adjusting the overall length because you're limited by the internal dimensions of the magazine. You can play around with those things and that's the fun of reloading, but don't be surprised if there is barely any improvement, or none at all. With a bolt action you have more leeway in my opinion, but when you're firing it in a semi-auto you have to balance accuracy with reliable feeding.

Of course my comments are limited to my own experiences.


19
Reloading / Re: How do you guys work on loads?
« on: June 14, 2013, 04:23:42 PM »
I do what clshade does, except when I do find the powder load that works best for me, I do one test further and adjust overall length.

I'm no expert but my advice is to research what components are popular and reputable for the cartridge you're loading. Then buy a bunch of the same components. Same powder, bullets, primers, and if possible, cases.
That way you can focus on powder load and overall length. Anytime you change powders or bullets, you have to work up a new load all over again. I personally find working up loads to be fun, but super time consuming. I can't imagine myself doing over and over for the same cartridge or firearm. So I try to stick with the same components if possible. I know that can be hard to do right now with the lack of availability, but once things slow down and you work up a good load that you like, stock up on those components. 
20
Reloading / Re: wet or dry tumbling
« on: May 17, 2013, 01:13:20 PM »
Dry tumble. After the range I tumble with walnut to get them clean, and then tumble in corn cob and polish to get them nice and shiny.

I'm amazed at how nice cases come out with wet tumbling and how it cleans the primer pockets.  But I'm on the fence on whether it's worth the extra work and initial cost for something that's mostly cosmetic. 
Pages: [1] 2 3 4