cheapest case cleaning method? (Read 8626 times)

kekoa

cheapest case cleaning method?
« on: October 08, 2013, 02:30:44 PM »
Over the long haul which method of case cleaning would you consider to be the cheapest, wet tumble, dry vibratory or wet ultrasonic? You know cost of equipment, cost of material needed to operate the equipment and such.

I am really looking for cheap and good cleaning is there one method that is both cheaper and cleans better or is it a give and take thing. Me personally I am jump back and forth between wanting to setup  a wet tumbler and dry media vibrator.

Inspector

Re: cheapest case cleaning method?
« Reply #1 on: October 08, 2013, 02:54:03 PM »
Good question. I have been using corncob and walnut media for the entire time I have reloaded. It is cheap and it lasts a long time. And if you want to increase the shine on your cases you can add a little polish to the media. They will probably never come out as nice as wet, but I feel the advantages and price of the dry media out weigh the wet. JMHO.
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

808gmac

Re: cheapest case cleaning method?
« Reply #2 on: October 08, 2013, 03:16:30 PM »
Water, dawn detergent, salt, then vinegar....wash, rinse, let it dry...brass comes really shiny....only for couple minutes

bass monkey

Re: cheapest case cleaning method?
« Reply #3 on: October 08, 2013, 04:07:20 PM »
Washing machine works really good for the piece that somehow ended up in my pocket

ren

Re: cheapest case cleaning method?
« Reply #4 on: October 08, 2013, 05:06:20 PM »
 :shaka:
« Last Edit: October 09, 2013, 08:47:49 PM by ren »
Deeds Not Words

kekoa

Re: cheapest case cleaning method?
« Reply #5 on: October 08, 2013, 06:42:33 PM »
Water, dawn detergent, salt, then vinegar....wash, rinse, let it dry...brass comes really shiny....only for couple minutes

Yeah I did that one, found it on youtube. That is what lead me to these questions. I think I may use the vinegar, water, salt soap solution to kick start the cleaning then tumble in dry media.

We will see how it goes.

SpeedTek

  • Trade Count: (+44)
  • Hero Member
  • *****
  • Posts: 4749
  • Total likes: 126
  • Car Nut, Machinist, Gunsmith & Monkey
  • Referrals: 2
    • View Profile
    • X-Ring on the WWW
Re: cheapest case cleaning method?
« Reply #6 on: October 08, 2013, 06:49:36 PM »
Make your friend do it.  Especially if they are retired and have nothing to do.
Political Correctness is FOS
I collect M1 Carbines, PM me if youre selling!
& Bolt Action 308s also 10/22 Rugers.
Buying STOCK Ruger 10/22 parts and bits, PM me.
Now doing Vintage VW Parts!

808gmac

Re: cheapest case cleaning method?
« Reply #7 on: October 08, 2013, 07:33:38 PM »
Make your friend do it.  Especially if they are retired and have nothing to do.
:rofl:

Dolomite

Re: cheapest case cleaning method?
« Reply #8 on: October 08, 2013, 08:01:22 PM »

Make your friend do it.  Especially if they are retired and have nothing to do.

I tried that, but retired old men are grumpy....

Mr. Farknocker

Re: cheapest case cleaning method?
« Reply #9 on: October 09, 2013, 08:12:38 AM »
That all depends on what you mean by "case cleaning". I consider case cleaning to be different polishing. There are people who have reloaded for 30 years without doing more than inspecting their cases and wiping it with a rag. The rounds look like crap but function the same as new brass. Others will tumble their cases for 15 minutes and consider them "clean" even though the cases still appear tarnished. And then there are others who will tumble their brass, add polishing compound and/or throw them into a sonic cleaner for good measure. Then there's wet tumbling..... If you are only concerned about function rather than appearance, than wiping or tumbling for 15 minutes is probably sufficient. A more effective, cheap but time consuming way is to spin the cases in a drill and polish them with fine steel wool like I did before getting a dry tumbler.  It's obviously impractical for pistol rounds but still do-able if your ultimate goal is being cheap.  If you want super shiny brass than the dry tumbling your brass for several hours with polish will do the trick (with the exception of cleaning the primer pockets). Next up in cost, time and resources is wet tumbling. Wet tumbling cleans primer pockets unlike dry tumbling and ensures that both the inside and outside of the cases are clean. I'm still on the fence when it comes to the effectiveness and practicality of sonic cleaners. To me, its the latest gimick to hit the firearm accessory market. The cost, set up and drying time seem to me to be more work than what its worth; and I haven't seen cleaner, shinier cases coming out of those things than cases cleaned with dry and/or wet tumbling. Considering the amount of money and time you will invest in cleaning the cases with a sonic cleaner, you're better off spending the money on a wet tumbler and SS media. But that just my opinion...

jaynick

Re: cheapest case cleaning method?
« Reply #10 on: October 09, 2013, 09:23:08 AM »
That all depends on what you mean by "case cleaning". I consider case cleaning to be different polishing. There are people who have reloaded for 30 years without doing more than inspecting their cases and wiping it with a rag. The rounds look like crap but function the same as new brass. Others will tumble their cases for 15 minutes and consider them "clean" even though the cases still appear tarnished. And then there are others who will tumble their brass, add polishing compound and/or throw them into a sonic cleaner for good measure. Then there's wet tumbling..... If you are only concerned about function rather than appearance, than wiping or tumbling for 15 minutes is probably sufficient. A more effective, cheap but time consuming way is to spin the cases in a drill and polish them with fine steel wool like I did before getting a dry tumbler.  It's obviously impractical for pistol rounds but still do-able if your ultimate goal is being cheap.  If you want super shiny brass than the dry tumbling your brass for several hours with polish will do the trick (with the exception of cleaning the primer pockets). Next up in cost, time and resources is wet tumbling. Wet tumbling cleans primer pockets unlike dry tumbling and ensures that both the inside and outside of the cases are clean. I'm still on the fence when it comes to the effectiveness and practicality of sonic cleaners. To me, its the latest gimick to hit the firearm accessory market. The cost, set up and drying time seem to me to be more work than what its worth; and I haven't seen cleaner, shinier cases coming out of those things than cases cleaned with dry and/or wet tumbling. Considering the amount of money and time you will invest in cleaning the cases with a sonic cleaner, you're better off spending the money on a wet tumbler and SS media. But that just my opinion...


i think cleaning brass with a sonic cleaner is a bonus feature. dropping in a 1911 dirty and removing it clean is priceless. you can even remove water and put gun oil in the unit and have it reach every nook and cranny. hornady even makes a unit large enough for a 16" ar15 upper.

surfmaster

Re: cheapest case cleaning method?
« Reply #11 on: October 09, 2013, 11:31:09 AM »
I use a vibratory tumbler with corn cob media purchased from Grainger and some NuFinish car polish. My brass has a nice clean finish depending upon how long I run the tumbler.

powder monkey

Re: cheapest case cleaning method?
« Reply #12 on: October 09, 2013, 11:52:46 AM »
dry lube neck and imperial sizing wax on case body.........run thru die..............wipe off and good to go

SurFKooK

Re: cheapest case cleaning method?
« Reply #13 on: October 09, 2013, 07:42:31 PM »
If you know anybody in the auto body or paint industry have them shake it up in a paint shaker it works. I work for a automotive paint store & i use walnut media put it in a plastic container so the brass dosen't get damaged & shake away. I usually leave it on the shaker 1/2 or whole day since we shake up so many cans in a day but if you was to constantly run it for 1/2 hour to 45 minutes it comes out decently clean.

kekoa

Re: cheapest case cleaning method?
« Reply #14 on: October 09, 2013, 08:23:42 PM »
That all depends on what you mean by "case cleaning". I consider case cleaning to be different polishing. There are people who have reloaded for 30 years without doing more than inspecting their cases and wiping it with a rag. The rounds look like crap but function the same as new brass. Others will tumble their cases for 15 minutes and consider them "clean" even though the cases still appear tarnished. And then there are others who will tumble their brass, add polishing compound and/or throw them into a sonic cleaner for good measure. Then there's wet tumbling..... If you are only concerned about function rather than appearance, than wiping or tumbling for 15 minutes is probably sufficient. A more effective, cheap but time consuming way is to spin the cases in a drill and polish them with fine steel wool like I did before getting a dry tumbler.  It's obviously impractical for pistol rounds but still do-able if your ultimate goal is being cheap.  If you want super shiny brass than the dry tumbling your brass for several hours with polish will do the trick (with the exception of cleaning the primer pockets). Next up in cost, time and resources is wet tumbling. Wet tumbling cleans primer pockets unlike dry tumbling and ensures that both the inside and outside of the cases are clean. I'm still on the fence when it comes to the effectiveness and practicality of sonic cleaners. To me, its the latest gimick to hit the firearm accessory market. The cost, set up and drying time seem to me to be more work than what its worth; and I haven't seen cleaner, shinier cases coming out of those things than cases cleaned with dry and/or wet tumbling. Considering the amount of money and time you will invest in cleaning the cases with a sonic cleaner, you're better off spending the money on a wet tumbler and SS media. But that just my opinion...

Now that's what I am talking about! Fine thorough answer. I am going to go with dry media and vibrating tumbler method for now. Thanks to all for the mana'o.

birdmove

Re: cheapest case cleaning method?
« Reply #15 on: December 08, 2013, 01:11:51 PM »
    I Bought a set of metal "bits", chuck them into an electric drill, mount the drill on a table, and push each case onto the chuck. The case spins, and I have used various materials to clean them off as mentioned above. It worked fine for handgun brass for me.