That all depends on what you mean by "case cleaning". I consider case cleaning to be different polishing. There are people who have reloaded for 30 years without doing more than inspecting their cases and wiping it with a rag. The rounds look like crap but function the same as new brass. Others will tumble their cases for 15 minutes and consider them "clean" even though the cases still appear tarnished. And then there are others who will tumble their brass, add polishing compound and/or throw them into a sonic cleaner for good measure. Then there's wet tumbling..... If you are only concerned about function rather than appearance, than wiping or tumbling for 15 minutes is probably sufficient. A more effective, cheap but time consuming way is to spin the cases in a drill and polish them with fine steel wool like I did before getting a dry tumbler. It's obviously impractical for pistol rounds but still do-able if your ultimate goal is being cheap. If you want super shiny brass than the dry tumbling your brass for several hours with polish will do the trick (with the exception of cleaning the primer pockets). Next up in cost, time and resources is wet tumbling. Wet tumbling cleans primer pockets unlike dry tumbling and ensures that both the inside and outside of the cases are clean. I'm still on the fence when it comes to the effectiveness and practicality of sonic cleaners. To me, its the latest gimick to hit the firearm accessory market. The cost, set up and drying time seem to me to be more work than what its worth; and I haven't seen cleaner, shinier cases coming out of those things than cases cleaned with dry and/or wet tumbling. Considering the amount of money and time you will invest in cleaning the cases with a sonic cleaner, you're better off spending the money on a wet tumbler and SS media. But that just my opinion...