Tom_G:
You don't
necessarily need iron to create a motoring effect. Eddy currents in non-magnetic materials have been used to develop attractive and repulsive magnetic forces in these non-magnetic materials sufficient to develop a rotative force. An example would be the old-time electric meters which have aluminum discs as the rotor or armature:
http://farm7.staticflickr.com/6111/6258069833_de4cf3149c_z.jpgI also once had a fish tank air pump which worked on this principle. A aluminum disc, rotated by the 50-60 Hz mains power, cranked a piston to pump the air into the tank.
Many other examples abound of motion created in non-magnetic materials, such as the pumping effect of hydro-magnetic pumps with no moving parts, which move electrically-conducting fluids through pipes. In fact, in most instances, the effect will not occur if ferromagnetic materials are used.
I only mentioned "coils and wires" because some attempted debunkers tried to posit "coils and wires" to produce this effect. It would be highly impractical to arrange such coils and wires in the circumstances shown in many of the videos, let alone power them.
I take a similar postion with respect to faking the effects with sophisticated image and motion picture editing. While I recognise that this is
possible to do by highly motivated and sophisticated hoaxters, once again, I find it highly improbable that all of these folks have spent the time and effort to fake them.
Thus, I came to my stated conclusion that the
preponderance of evidence indicates that the effect is real.
I also note one "faker" of the water-glass experiment froze the water in the glass and shattered it with a hammer to show this, which was highly amusing.
However, without actually experimenting with this particular phenomenon, I can almost "see" how the effect
might be real. Water surface tension, caused by the dipolar nature of the water molecule, is quite substantial, and I can
almost see how rapid spinning of the container
might align these molecules electrostatically, such that the surface tension forces
might hold the mass of water together for a short time.
Breaking the tension by either touching the surface, [/B]or[/B] by bringing another charged item (such as one's finger) close to the surface might be sufficient to break the surface tension and cause the structure to collapse.
You might note that occasionally, when small water drops are splashed on the surface of standing still water, instead of merging with the surface, the drops maintain their integrity and just sit there as little spheres on the standing water. This is due to the strong surface tension of the droplets, and of the surface itself.
Note that I remain
uncommitted as to whether the water-cup phenomenon is "real" or "faked," and await further information on it. At this point, I am merely stating that at least with small-scale personal observation, I can almost "see" how it might happen when scaled up.
I, too, like the Thomas of the New Testament, am a born "doubter," and I, too, like the Apostle "Doubting Thomas," frequently require visual and manual demonstration to prove that "Christ's wounds" were real. But in this case of the spinning bullets, I've seen enough. Perhaps I'm a fool and a tool, perhaps not.
Terry, 230RN