Silhouette range for the first time (Read 14204 times)

Cougar8045

Re: Silhouette range for the first time
« Reply #20 on: August 03, 2011, 11:12:29 AM »
Making a frame is cheap and easy.  Making one well..........well that's something else.  :)
Haha, true!  The biggest problem with mine is that when I went to Home Depot for the lumber, all their 1x's looked like rejected rocking chair parts.  The other problem is that I built it in five minutes, in my buddy's kitchen, with a reciprocating saw.  Meh, it works, but I do wish I had built the thing the night before, in my garage; instead of at his house, the day we were going to the range.  Being in a hurry is not conducive to quality work!   :'(
I'm just a fluffy white bunny rabbit who lost his way. 

"If a thief be found breaking in, and be smitten that he die, there shall no blood be shed for him. ..."  -Exodus 22:2

Funtimes

Re: Silhouette range for the first time
« Reply #21 on: August 03, 2011, 01:03:38 PM »
You don't need a saw.  Have the guys at home depot or lows cut the 8" board down to size for you.  Cost you like 3 bucks + gas and hardware.
Check out the Hawaii Defense Foundation.
HDF on Facebook
Defender of the Accused in Arkansas Courts
Posts are not legal advice & are my own, unless said so.

PeaShooter

Re: Silhouette range for the first time
« Reply #22 on: August 03, 2011, 06:09:52 PM »
You guys are scaring me now.:'( I thought it was gonna be easy once I got around to trying to make one, like I figured the hardware store would just have exactly the right size of everything and I'd just get a hammer and pound them together or something with nails. :crazy: I have to saw and drill myself? That sucks. :)

I'm not particularly handy. I don't know how to make anything. :-\ My dad has tons of everything though and is very handy. I guess I have to let him help me. I probably need to make a lot of frames anyway, because I expect I will shoot them into pieces with my terrible aim.

onfloat

Re: Silhouette range for the first time
« Reply #23 on: August 03, 2011, 10:08:00 PM »
If just build it to the sizes listed on the website it will fit fine.

Funtimes

Re: Silhouette range for the first time
« Reply #24 on: August 04, 2011, 12:42:59 AM »
You guys are scaring me now.:'( I thought it was gonna be easy once I got around to trying to make one, like I figured the hardware store would just have exactly the right size of everything and I'd just get a hammer and pound them together or something with nails. :crazy: I have to saw and drill myself? That sucks. :)

I'm not particularly handy. I don't know how to make anything. :-\ My dad has tons of everything though and is very handy. I guess I have to let him help me. I probably need to make a lot of frames anyway, because I expect I will shoot them into pieces with my terrible aim.

I just told you that you don't need a saw.  You do need to drill it though, but that isn't hard at all.
Check out the Hawaii Defense Foundation.
HDF on Facebook
Defender of the Accused in Arkansas Courts
Posts are not legal advice & are my own, unless said so.

Tom_G

Re: Silhouette range for the first time
« Reply #25 on: August 04, 2011, 07:59:56 AM »
The lumber store will make the cut for you.  City Mill makes the 1st cut free, which is all you need.

I use 2" C-clamps to hold my frame together.  No drilling required, and it disassembles completely for storage and repair.
The difference between theory and reality is that, in theory, there is no difference between theory and reality.

Jkeone808

Re: Silhouette range for the first time
« Reply #26 on: August 04, 2011, 02:48:33 PM »
I had city mill cut the wood to size and drilled 4 complete frames together on my kitchen counter in like 15 min. Super simple.
"A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government."
- George Washington

GZire

Re: Silhouette range for the first time
« Reply #27 on: August 04, 2011, 04:18:22 PM »
^^^Everything is always cool until the meathead next to you at Kokohead starts shooting out your frame.  I swear most of the guys out there are cockeyed and have no idea how to line up their frame in the proper lane.

Jaydawg

Re: Silhouette range for the first time
« Reply #28 on: August 06, 2011, 12:23:01 AM »
I saw a pretty slick folding setup for pistol frame today.

Basically an H.  The top portion was held together by cardboard and binder clips.  The cardboard needs to be exact width of the frame.  Middle brace held to the legs by wing nuts and bolts.  Loosen the wing nuts and all 4 legs fold together to fit in a trunk.  I'll try and do one.  Maybe next weekend.

Funtimes

Re: Silhouette range for the first time
« Reply #29 on: August 06, 2011, 12:40:33 AM »
I saw a pretty slick folding setup for pistol frame today.

Basically an H.  The top portion was held together by cardboard and binder clips.  The cardboard needs to be exact width of the frame.  Middle brace held to the legs by wing nuts and bolts.  Loosen the wing nuts and all 4 legs fold together to fit in a trunk.  I'll try and do one.  Maybe next weekend.

You should see the Corolla when it was loaded up for 8 students stands, tents, guns, ammo, training materials, and cardboard.... crazy stuff I tell you :).  :geekdanc:
Check out the Hawaii Defense Foundation.
HDF on Facebook
Defender of the Accused in Arkansas Courts
Posts are not legal advice & are my own, unless said so.