The time and hassle is most of the reason that I want to do it. Same reason that I built a 300BLK. Same reason that I handload everything that I shoot.
==========
ok then...
Read books- see the pic attached
See my video on youtube for an overview of my process:
Decide what bullets you want to cast and see if you can find the moulds.
Then decide how you are going to size and lubricate them. ie what machine or method.
The conventional bullet lube is applied via lubrisizer or melting the lube in a pan and using a cookie cutter device of some sort.
LEE sells a thing called tumble lube, but I have not tried it.
You might be able to use the new generation of plastic coatings instead of conventional lube.
See S and S casting for a sample of plastic coated 30 carbine bullets
For hi-speed lead bullets, a gas check is usually applied to the base via lubrisizer machine.
Lyman #2 is a standard alloy but you can also blend your own mix with scrap lead and other stuff you find locally.
Last year I went to a recycling place in kapolei and bought soft scrap lead. I think they had either wheel weights or Linotype there also.
I created a spreadsheet that can calculate the approximate composition of a mix by inputting the metal you have available.
RE: melting pot=> I only used bottom pour. It works for me. But ladle pouring is fine too and you don't have to fiddle around with the valve.