My M&P 9C that has about 1500-2K rounds through her has been having failure to fire, about 4 rounds per 50 rd box.
Gun just goes click. So it is cocked, and tap rack works and next round fire. Round that didn't fire didn't even have a primer strike. Tried various ammo.
Cleaned the gun, even the striker channel. Some said if excess oil/lube gets in there, the problem will happen also. Still no bang. And prior to cleaning, gun wasn't even that dirty.
So I did the "pencil" test, but with the inside of a ball point pen instead. Put the ink casing down the barrel, metal tip side sticking out. Point the gun in the air and press trigger. The ink didn't even move.
So I tried the same with my VP9 and the ink flew out about 3 feet high. You're supposed to use a wooden pencil and eraser side down, but we didn't have one.
I emailed S&W and awaiting response. I'll replace the striker spring and if the problem happens again, then will send gun into S&W because it may be something else causing the spring to wear quickly.