Worn Striker Spring (Read 14405 times)

changemyoil66

Worn Striker Spring
« on: August 26, 2019, 09:43:09 AM »
My M&P 9C that has about 1500-2K rounds through her has been having failure to fire, about 4 rounds per 50 rd box.

Gun just goes click.  So it is cocked, and tap rack works and next round fire.  Round that didn't fire didn't even have a primer strike.  Tried various ammo.

Cleaned the gun, even the striker channel.  Some said if excess oil/lube gets in there, the problem will happen also.  Still no bang.  And prior to cleaning, gun wasn't even that dirty.

So I did the "pencil" test, but with the inside of a ball point pen instead.  Put the ink casing down the barrel, metal tip side sticking out.  Point the gun in the air and press trigger.  The ink didn't even move.

So I tried the same with my VP9 and the ink flew out about 3 feet high.  You're supposed to use a wooden pencil and eraser side down, but we didn't have one.

I emailed S&W and awaiting response.  I'll replace the striker spring and if the problem happens again, then will send gun  into S&W because it may be something else causing the spring to wear quickly.

Flapp_Jackson

Re: Worn Striker Spring
« Reply #1 on: August 26, 2019, 09:59:16 AM »
Is that the original spring that came with the firearm?

I had similar issues with my G17 when I used the lightest spring (I think 3.5 - 4 lbs) in a pack I received with an upgrade trigger.  Replacing the original spring worked.
The reasonable man adapts himself to the world;
the unreasonable one persists in trying to adapt the world to himself.
Therefore, all progress depends on the unreasonable man.
-- George Bernard Shaw

changemyoil66

Re: Worn Striker Spring
« Reply #2 on: August 26, 2019, 10:25:56 AM »
OG striker spring, but not OG trigger and trigger spring.  Got the Apex trigger in there (purple).

Flapp_Jackson

Re: Worn Striker Spring
« Reply #3 on: August 26, 2019, 10:32:49 AM »
OG striker spring, but not OG trigger and trigger spring.  Got the Apex trigger in there (purple).

Maybe try replacing the trigger & trigger spring if you have the original.  Eliminate variables ....
The reasonable man adapts himself to the world;
the unreasonable one persists in trying to adapt the world to himself.
Therefore, all progress depends on the unreasonable man.
-- George Bernard Shaw

ren

Re: Worn Striker Spring
« Reply #4 on: August 26, 2019, 11:17:42 AM »
or just get a Glock  :geekdanc:
Deeds Not Words

changemyoil66

Re: Worn Striker Spring
« Reply #5 on: August 26, 2019, 11:27:58 AM »
or just get a Glock  :geekdanc:

I was told that by 3 people at the range...

changemyoil66

Re: Worn Striker Spring
« Reply #6 on: August 26, 2019, 11:30:56 AM »
Maybe try replacing the trigger & trigger spring if you have the original.  Eliminate variables ....

Don't got the originals.  Dumped it when we moved.  And installing it would be over my pay grade.  The striker spring is within my pay grade.  Did it on my VP9 when I replaced the plastic striker sleeve with a metal one.  Lost 1 side of the C clamp.  Hunted for 45 mins.  Was about to order another one and I found it.  Like I punched in my CC info and everything. 

Next time I'm working on stuff under tension either in the bathroom or inside a ziploc bag.

macsak

Re: Worn Striker Spring
« Reply #7 on: August 26, 2019, 12:07:00 PM »
I was told that by 3 people at the range...

it's called a clue...

drck1000

Re: Worn Striker Spring
« Reply #8 on: August 26, 2019, 12:15:37 PM »
You mentioned not saying a primer strike. But did you see anything on the rim of the casing? Might be tough to tell on some casing.

A while back, an IPSC/USPSA shooter was having similar troubles during a match with M&P 9 5”. I recall something about the channel or whatever the firing pin rides in was off somehow. Maybe worn, defective  whatever. Anyways, it wasn’t aligning the firing pin properly and he suspected it was missing the primer.

I concur with previous feedback that best bet to revert back to OEM to eliminate variables. OBE for you since you dumped the OEM parts, which you get a :facepalm: badge for. Anyways, was just mentioning something else that I observed with M&Ps.

drck1000

Re: Worn Striker Spring
« Reply #9 on: August 26, 2019, 12:16:00 PM »
it's called a clue...
Can you pls elaborate  ???  ;D

ren

Re: Worn Striker Spring
« Reply #10 on: August 26, 2019, 12:29:47 PM »
or get a time tested 1911
Deeds Not Words

changemyoil66

Re: Worn Striker Spring
« Reply #11 on: August 26, 2019, 12:53:19 PM »

changemyoil66

Re: Worn Striker Spring
« Reply #12 on: August 26, 2019, 12:53:58 PM »
or get a time tested 1911

Trading no primer strike to jams...gotta think about that one. :rofl:

ren

Re: Worn Striker Spring
« Reply #13 on: August 26, 2019, 01:29:54 PM »
Trading no primer strike to jams...gotta think about that one. :rofl:

only if you shoot like a girl...
Deeds Not Words

Flapp_Jackson

Re: Worn Striker Spring
« Reply #14 on: August 26, 2019, 04:02:21 PM »
only if you shoot like a girl...

Misogynist!  Sexist!  Patriarchal!

https://en.wikipedia.org/wiki/Tori_Nonaka




« Last Edit: August 26, 2019, 04:07:46 PM by Flapp_Jackson »
The reasonable man adapts himself to the world;
the unreasonable one persists in trying to adapt the world to himself.
Therefore, all progress depends on the unreasonable man.
-- George Bernard Shaw

drck1000

Re: Worn Striker Spring
« Reply #15 on: August 26, 2019, 04:34:55 PM »
only if you shoot like a girl...
From what Macsak says, that might be an improvement.  ;D

I keed. I keed.  :rofl:

ren

Re: Worn Striker Spring
« Reply #16 on: August 26, 2019, 04:58:48 PM »
Misogynist!  Sexist!  Patriarchal!

https://en.wikipedia.org/wiki/Tori_Nonaka






action shooters can sling lead fast
and she's using a Glock - not surprisingly as she is sponsored.
anyways,
there's more background info on that shooter... :-X
Deeds Not Words

Heavies

Re: Worn Striker Spring
« Reply #17 on: August 26, 2019, 09:04:11 PM »
Maybe the aftermarket trigger doesn't pull the striker back as far as the stock trigger would, before allowing the striker to fall.  That, in conjunction with a weakened striker spring, might be causing the failures to fire. 

dogman

Re: Worn Striker Spring
« Reply #18 on: August 26, 2019, 09:28:21 PM »
or just get a Glock  :geekdanc:
or get a time tested 1911
or . . . revolver

changemyoil66

Re: Worn Striker Spring
« Reply #19 on: August 27, 2019, 12:33:41 PM »
Maybe the aftermarket trigger doesn't pull the striker back as far as the stock trigger would, before allowing the striker to fall.  That, in conjunction with a weakened striker spring, might be causing the failures to fire.

That's my 2nd thought.  So if it happens again, then I gotta look into that.