Rifle sleds? (Read 3105 times)

Rhed

Rifle sleds?
« on: January 24, 2021, 10:08:08 PM »
Anyone used a sled to help zero in and especially use for working up reloads? Sometimes, I feel like maybe my scope is not set right. Or my reloads are ok but many flyers cause human error. Then I blame myself cause don’t know how to shoot. Or my rifle just shoots bad. But I do wanna at least eliminate some of the errors down. I recently just found out that shooting with a bipod on a bench is not good. I think my sh!t jumps from recoil using a bipod on a bench. No mater how much I load the bipod. Or just a standard front rest with rear rest would suffice? Something like this.. https://www.midwayusa.com/product/1018149999?pid=902896. Thoughts and opinions please.. Thanks :shaka:

drck1000

Re: Rifle sleds?
« Reply #1 on: January 25, 2021, 01:45:24 PM »
I have a Lead Sled that I used for zeroing when I first got into rifle shooting.  I'll still use it from time to time, but not for load development.  It was when I wanted to test more of the rifle's capability and see how much was me.  For ARs and 1x red dot, I wasn't expecting uber accuracy.  But did want to know what the rifle was capable of as a baseline. 

I have considered getting a more solid front rest and rear bag setup to help remove more of the human error in load development (same reasons for this thread).  Particularly when I get to the seating depth testing and the grouping is a key indicator. I've been shooting with bipod and solid rear bags (Precision Underground, which I found from your feedback btw) and so far I'm ok with things.  The trouble with the Lead Sled is that it doesn't let me get comfortable or with the same head position as the gun alone since it has a pretty thick rubber plate on the end.  The rest that you posted seems like it would be more forgiving.

Then on the other hand, some part of me sort of wants that human factor to be in there. Where I have to practice and get confident in marksmanship for the results. 

Rhed

Re: Rifle sleds?
« Reply #2 on: January 25, 2021, 03:17:30 PM »
With that sled I posted, my intent was just to do reloads and data at the same time. It would be pretty much sight target and shoot. No use of body form holding the rifle. Just wondering I if it works.

drck1000

Re: Rifle sleds?
« Reply #3 on: January 25, 2021, 03:59:05 PM »
With that sled I posted, my intent was just to do reloads and data at the same time. It would be pretty much sight target and shoot. No use of body form holding the rifle. Just wondering I if it works.

Gotcha.  Like a rail gun?  Where it's set rifle, shoot, and see results?

With the Lead Sled, I didn't invest in the weights/bags to lock things down.  It's heavy, but not enough such that even the mild recoil of an AR needed some level of adjustment if I was doing zeroing.  I was shooting 3-5 round groups, so I needed to be sure the POA was back on prior to next shot.  It usually only required a slight adjustment. 

ETA (just watched the video).  That Hyskore seems like it would be similar to a Lead Sled if you were shooting groups, where unless it's bolted down, it would need a quick adjustment to ensure POA "back on".  But overall reduces "human induced error".

Rhed

Re: Rifle sleds?
« Reply #4 on: January 25, 2021, 10:04:12 PM »
Gotcha.  Like a rail gun?  Where it's set rifle, shoot, and see results?

With the Lead Sled, I didn't invest in the weights/bags to lock things down.  It's heavy, but not enough such that even the mild recoil of an AR needed some level of adjustment if I was doing zeroing.  I was shooting 3-5 round groups, so I needed to be sure the POA was back on prior to next shot.  It usually only required a slight adjustment. 

ETA (just watched the video).  That Hyskore seems like it would be similar to a Lead Sled if you were shooting groups, where unless it's bolted down, it would need a quick adjustment to ensure POA "back on".  But overall reduces "human induced error".

Think I’m gonna pass on this one. Just thinking about it, too bulky. And the thought of it to properly work is to screw it or lag it down? More tools to bring and log around. Besides, don’t think screwing it down at the koko head bench is allowed. I’m just gonna invest in a good front and rear rest. Which I’ve thought about before. I’ve been giving thoughts from the ones from Sinclair for awhile now. And a Protektor rear rest. Might just take the plunge. Thanks for your input..  :shaka:

drck1000

Re: Rifle sleds?
« Reply #5 on: January 26, 2021, 01:47:58 PM »
Think I’m gonna pass on this one. Just thinking about it, too bulky. And the thought of it to properly work is to screw it or lag it down? More tools to bring and log around. Besides, don’t think screwing it down at the koko head bench is allowed. I’m just gonna invest in a good front and rear rest. Which I’ve thought about before. I’ve been giving thoughts from the ones from Sinclair for awhile now. And a Protektor rear rest. Might just take the plunge. Thanks for your input..  :shaka:
Cool.  Looking forward to what you decide on.  I was thinking about a more solid front rest and rear bag (similar to the Protektor), where it the gun is almost "set".  Not quite the F-Class setups, but similar idea where less human "input" in the shooting.

Flapp_Jackson

Re: Rifle sleds?
« Reply #6 on: January 26, 2021, 02:14:55 PM »
You should read as many reviews as possible.  Some of these affordable products are reported by some to have "loose tolerances", meaning the thing won't tighten or stay tightened in the same exact shape you put it in each time.

If I were to looking to buy, I'd want something that's welded in every connection point where adjustments aren't needed.  The adjustments would need to involve tight connective hardware that doesn't lend itself to any movement in any direction other than the adjustment intended.

As for mounting, most of the portable sleds I see do not attach to the bench.  They have a set of hooks or other edge guide that overhangs the front of the bench to keep it from moving to the rear.  I don't see them being bolted or screwed down, especially since the adjustable legs/feet need to be free to raise and lower the corners so you can get the sled level on the X and Y axis.  I would consider mounting the sled to a plywood base, then clamping the base to a bench.  No new holes -- no tools required other than clamps.  Still, you need to losen the base to adjust for level, then retighten.

Just some thoughts based on the info posted.  I don't have any real experience in this, but the products and reviews tell me these are not precision sleds, but rather aids for eliminating at least SOME of the variances introduced by inconsistent human movement/operation.   :thumbsup:

The reasonable man adapts himself to the world;
the unreasonable one persists in trying to adapt the world to himself.
Therefore, all progress depends on the unreasonable man.
-- George Bernard Shaw

ren

Re: Rifle sleds?
« Reply #7 on: January 26, 2021, 03:23:53 PM »
you can have a test sled made but from what I have seen and read it is very expensive. A shooter over at nationalmatch.us machined one out of billet. He designed and cut it. I can't find that image anymore but it is similar to what the AMU uses to test ammo



Most of the sleds I've seen have a mechanism for it to recoil i.e. rails.



as you can see its not practical. I just use a front rest and a rear bag. Technique is important too. i.e. putting or resting an AR on the pistol grip will cause fliers; resting the tip of the barrel on a front rest will cause errant shots too.
I had the same situation develop when shooting a bipod off a bench or any other hard surface. It jumps. If it jumps to either side it was most often a shot that is off call. I read that "loading" the bipod or pushing forward slightly on it eliminated the jump to the side. Ideally the rifle will recoil up and down - not lateral. Same thing when shooting with a sling. If that doesn't eliminate the sideways jump then there is something else going on with your position.
« Last Edit: January 26, 2021, 03:45:23 PM by ren »
Deeds Not Words

Rhed

Re: Rifle sleds?
« Reply #8 on: January 26, 2021, 11:34:17 PM »
You should read as many reviews as possible.  Some of these affordable products are reported by some to have "loose tolerances", meaning the thing won't tighten or stay tightened in the same exact shape you put it in each time.

If I were to looking to buy, I'd want something that's welded in every connection point where adjustments aren't needed.  The adjustments would need to involve tight connective hardware that doesn't lend itself to any movement in any direction other than the adjustment intended.

As for mounting, most of the portable sleds I see do not attach to the bench.  They have a set of hooks or other edge guide that overhangs the front of the bench to keep it from moving to the rear.  I don't see them being bolted or screwed down, especially since the adjustable legs/feet need to be free to raise and lower the corners so you can get the sled level on the X and Y axis.  I would consider mounting the sled to a plywood base, then clamping the base to a bench.  No new holes -- no tools required other than clamps.  Still, you need to losen the base to adjust for level, then retighten.

Just some thoughts based on the info posted.  I don't have any real experience in this, but the products and reviews tell me these are not precision sleds, but rather aids for eliminating at least SOME of the variances introduced by inconsistent human movement/operation.   :thumbsup:

Yes agreed. I went through 2 types of rest. One was a combo type front and rear rest, Champion brand or something. Was one orange one. The elevation adjustment had some slop. And the lock screw didn’t fit in the groove well. So I kept over tightening to stop the slop. Before I new it, I’ve damaged couple of threads in the edge of the groove. And the rear rest came with it ripped recently. Wasn’t leather kine that’s why. The other one was a CTK rest. It is a one piece type. The rear attachment didn’t quite work for well for my AR stocks. And trying to get fine adjustment for windage was, well, no adjustments at all. Gotta move the whole rest. Very time consuming between reload groups. Though, it is good for zeroing a scope. So time to look for a quality made front and rear rest. I mean, it’s probably not gonna make me shoot better overnight, but if I go quality, I have no reason to blame the shooting rest anymore. Just myself and practice to get better.

Rhed

Re: Rifle sleds?
« Reply #9 on: January 26, 2021, 11:44:59 PM »
you can have a test sled made but from what I have seen and read it is very expensive. A shooter over at nationalmatch.us machined one out of billet. He designed and cut it. I can't find that image anymore but it is similar to what the AMU uses to test ammo



Most of the sleds I've seen have a mechanism for it to recoil i.e. rails.



as you can see its not practical. I just use a front rest and a rear bag. Technique is important too. i.e. putting or resting an AR on the pistol grip will cause fliers; resting the tip of the barrel on a front rest will cause errant shots too.
I had the same situation develop when shooting a bipod off a bench or any other hard surface. It jumps. If it jumps to either side it was most often a shot that is off call. I read that "loading" the bipod or pushing forward slightly on it eliminated the jump to the side. Ideally the rifle will recoil up and down - not lateral. Same thing when shooting with a sling. If that doesn't eliminate the sideways jump then there is something else going on with your position.

Your spot on on the bipod on the bench. I’ve actually figured that out late. My sh!t jumps left or right when I load it. But a bipod is damn good on soft ground like dirt or grass. I can load it pretty good prone and get that long range shot. But when I bring the same setup on the bench, shooting just 100, damn I use to scratch my head, like wtf? I should’ve did my homework on bench shooting. By your right, front and rear bag and technique. Gotta go back to the drawing board.